Recent content by BCMguy

  1. B

    Trouble Accessing Cams via Web Interface

    Very possible. When manually adding 3rd party cams it only asks for IP address, Username, and password. I'm unsure how to get the second channel indicated via the IP address alone. What's really odd is if I select one of the boobie cams, go into the settings, and click for a preview it gives...
  2. B

    Trouble Accessing Cams via Web Interface

    You're 100% correct - I have no idea why I didn't process that. All that said - Unifi NVR does not see the dual feed from the boobie cams. Boo.
  3. B

    Trouble Accessing Cams via Web Interface

    Holy crap it was the default gateway! Once set correctly I can now access those missing cams via my primary network. Thank you!!
  4. B

    Trouble Accessing Cams via Web Interface

    Thank you for the replies so far everyone. I've verified IPs assigned to the cams and to the VLAN rules, everything matches and is correct. I have tried several browsers, same issue applies. I will try a power cycle and maybe factory reset but I think I'm going back to Blue Iris. The more...
  5. B

    Trouble Accessing Cams via Web Interface

    I was never able to access those 3 cameras off the VLAN camera network via the web GUI, however for devices on the same VLAN I was able to get access. All 3 do show up as active in my Unifi controller and are functional. They were running fine when I took my BI PC offfline for replacement...
  6. B

    Trouble Accessing Cams via Web Interface

    Hello, I have a variety of EmpireTech Dahua cameras. They all live on a separate camera VLAN with a rule in place to allow Primary network devices to access the Camera VLAN/IPs. I am able to access the web GUI for 4 of my 7 cameras, however "the connection times out" on the other three when...
  7. B

    CodeProject AI insane lag

    Thank you. So far my times are around 2-300ms. Dramatic improvement!
  8. B

    CodeProject AI insane lag

    Alright making those changes down to 4 images and dropping all but the Ipcam general list I'm down to about 400ms! I'm getting a lot more Nothing Found drops, but I'll try one of the other lists and see how they work out. Still using main stream images. Any thoughts on the Apply to motion...
  9. B

    CodeProject AI insane lag

    Thank you for that info! I'll drop the images analyzed and edit the models being used. I believe I've been using combined, dark, and animal. In many cases it seemed like the default list was doing better, but I know it takes a lot of tweaking. I'll report back!
  10. B

    CodeProject AI insane lag

    Good to know... I do see a GPU % flash up during triggers, that must just be the build in one I assume? Perhaps I'll need to look into a separate card. Lots of learning on my end -
  11. B

    CodeProject AI insane lag

    Hello, I just got CodeProject AI setup and am experiencing significant delays in processing the images. I'm talking like 1500+ ms. This seems to be way beyond what others are experiencing - any advice on things to check? CPU jumps sometimes to 100% while processing images too. I7-4770...
  12. B

    Review-Dahua IPC-HDBW4231F-E2-M Dual Starlight Cam

    That looks like IR reflection off the domes.
  13. B

    NTP Sync Fails - some cameras only

    Hello, I have a variety of Dahua (Empire Tech) cameras to include the 2MP Starlight, 4MP (5442 series), 5831 8MP, and 4231 2MP boobies. All of them sync with my Synology NAS for NTP except one of the 5442s and both boobie cams. Both 5442s are running the same 12-03-2020 software build...
  14. B

    Setting Advice

    I cleaned the lenses and it certainly improved the images. The lights are the biggest issue though. I appreciate everyone's input!
  15. B

    Setting Advice

    That is correct -