Recent content by DanITman

Ok, I got the original firmware from the manufacture. It looks to be very close to the hikvision original. Here are the two header outputs. The firmware they sent me. Head decoded data(108b) : 00000000 53 57 4B 48 B5 5B 00 00 A0 01 00 00 08 00 00 00 SWKH.[.......... 00000010 01 00 00 00...

Anyway to use this code to change the OEM code. I feel like my NVR having an OEM code of 0x1 is causing firmware upgrades to fail. I have the correct firmware with the correct platform code. So the language code, platform code are all correct. Oem code is different...

I'm in serial console already. My first screenshot was an attempt to upload through tftp via the uart interface. The file gets there fine, it just fails on the update. I think my model varies slightly from @Bizentech as mine contains acusense. I think its close though. I'm attempting to get...

Ok, I was able to dump dmesg and printevn and getHardinfo. I was not able to enable ssh but having the UART it ended up printing out the getHardInfo. I could also send limited commands and was able to get the rest. I also pulled this value that was printed on the board DS-80242 Rev 2.0...

Here is the special firmware produced by Hikvision: https://us.hikvision.com/sites/default/files/firmware/dz_k51_ml_std_v4.50.000_210407.zip It contains a special api endpoint for remote controlling the DVR over IP.

The model I included is the correct model for hikvision. Its an off brand so the model is weird and doesn't yield many google results. It came with a firmware and I don't have the firmware file. I've asked the ebay seller if he has it so I can unpack it. I included a link to the firmware page...

Hey guys....trying to upgrade an ebay find. I believe its a DS-7608NI-I2-8P but it actually has a different model in the firmware. It doesn't say Hikvision on the front instead it just says NVR. I've attempted to upgrade the firmware a couple times and it just fails. I finally got UART...