Recent content by Evroul

If your router can do WireGuard AND you have an iPhone I can highly recommend that. The wg app on iPhone can make on demand on / off when leaving your home WiFi and going LTE. Never have to think about it. Pretty nifty feature I’m very happy with

I had the same. Tried multiple things but had to give up. Fun as it was to see AI frame a plant and give it a percentage score I went back to IVS in cameras. To me not generally speaking it has given me far less if not close to 0 false alerts. BI motion e.g when snowing or light changes, trees...

You cant set manual and then e.g. 0-10 which equals 1/100 fixed. Can I see your camera menu. I might be way off here just thinking out of the box as I have had similar issue

Have you tried not setting firm exposure? 1/100 is 10 and gives the camera operating room based on lighting Moreover do you have any possible obstructions? One of my cameras indoor is in a corner where there is a door under. If the door is not closed or fully open the IR catches it and somewhat...

Wireguard

Ok so everything is working when using ONFIV. I know I know, dont fix it if it aint broken. Well I wanna learn and also try to move towards AI Codeproject So I've setup something like in the attached pics, but nothing is happening. If I only do zone A its working but I only want ppl coming into...

Your NVR says : Supports 4 MP lite, and when enabled the image effect is similar with 4 MP Can you remember your settings on the cameras? Perhaps having set them “higher” than what your NVR can handle

Have you tried these steps https://www.hikvision.com/content/dam/hikvision/en/support/faq/How-to-solve-Hik-Connect-offline-issue.pdf it’s a step by step walkthrough of possible errors.

Dahua cameras, at least the ones I got from Andy all come with 192.168.1.108. The ip on your hikvisions may be static and not getting dhcp addresses from your router? So since only one is working it could the the one getting an ip in your scope. Not a network engineer either, and never had...

What are your settings, say do you go full throttle on framerate etc. Maybe your connection isnt sufficient for your settings? Just starting of here with initial thoughts before knowing your exact setup. If it’s an “older” used to work system it could be cables, ports not properly...

What camera is this?

I have been trying to avoid any backlight at least at night. But with the sun etc in living room and at certain spots outside I have enabled WDR. Is HLC a better option for smoothing out light etc ?

What exposure are you running on the color img?

My 4K/T at the backyward with one small LED floodlight

Your setup seems really nice - And it works. Living in Denmark having to provide the police with this sort of information is kinda rare. Thx for your feedback, I will add a small floodlight to provide with the last light.