So there are 2 new IPC B5442Z cameras on site. One is on a PtMP with a Lite AP GPS as the AP and 2 Nanobeam 5AC Gen2s as clients. Dashboard pictured above. Each of the links has at least one existing camera that is working properly.
The other is on a PtP with 2 TP Link CPE 510s and 2 existing...
Fyi I fixed the Drive link sharing setting above. These issues are happening on wireless links. Here is the dashboard of one of them, I don't think the wireless capacity is an issue. If it was, it expect all of the other cameras on the same link to have issues.
I am adding a few IPC B5442Z to a Sigmax and PTP wireless system and I am having this crazy compression effect I can't figure out. Has anyone seen this?
I have messed with various settings and it always comes back after a few minutes. The original cameras are older Dahua 4mp IP bullets...
Somehow when I double click a camera, that camera pauses. I am not seeing the setting that makes it open that camera to fullscreen. I am sure it is obvious, but I am not seeing it. Does anyone know where that setting is?
Thanks,
John
I am stuck on something that I suspect is pretty easy to remedy. I am more comfortable with BI than NVRs. I installed 4 cameras before I had the NVR. I logged into to each camera, set a password, and viewed the aim in the web browser and a POE switch. When I received the NVR, I logged into each...
I was having issues today with 5.2.5.5 spiking CPU to 100%. I switched from Intel to Intel+VPP and jumped down to 40%. However, I noticed my MP/s jumped by 15%. I will have to test h.265 to see if I can get things stable to save some bandwidth and storage.
Thanks all. Ken got me fixed up. There is a pause button on the top of the screen I was overlooking. I will suggest to Ken that he make the pause button easier for oblivious users like myself to notice.
Thanks for your reply.
Ken kindly asked if the pause button on the top right was clicked. It was. Sigh. It's embarrassing being the "user error"...
All set now that I un paused
Hi,
I noticed an update was available yesterday. Now all of the cameras images are static (except for a few that are offline due to wifi connectivity issues). UI3 works in live view and Recordings and clips are occurring normally.
As far as I know, it was working before the update.
This is a...
Thanks for your feedback Dave. I agree that it doesn't seem to have a useful meaning. If it did, I'd like to understand it to prevent issues on any POE connected device - NVR or PC.
Sorry, but I can't help with the video loss or offline notifications. I don't have access to the ePOE nvr I saw...
Dahua cameras have a menu item called Enable Authentication or something like that. Maybe that will help you find the right combination of settings and strings.