Recent content by jmulvihill

I have Sovmiku/ Hiseeu PTZ cameras. I had the same issue of not being able to set the "Home" position. I found that with Guard Station NVR software, that the term was "Auto-Guard" which has an eyeball symbol, found in the PTZ/Preset control panel. I deleted all my presets, then added the Preset...

Whoops! Wrong link, try this one: https://s.click.aliexpress.com/e/_dTKoxEO

Since my NVR is limited to 8mp, both cams need not exceed 8mp combined. Needs to be POE camera. Any suggestions? https://www.aliexpress.com/item/32831300257.html?spm=a2g0s.8937460.0.0.5f792e0eWhzhDd 2MP Fisheye with POE. One camera will see both directions, no need for a second camera. I like...

I would avoid PTZ unless it had auto-tracking. Here is my PTZ recommendation: Ms.EddyQue Anxinshi Technology Co.,Ltd Email:eddyq@astcct.com Web:www.astcct.com Tel:+86-755-28359257 Fax:+86-755-83241953 WhatsApp/Mobile:+86-13927402221 Wechat:498866541 Skype:eddyque (See attached picture for PTZ...

I can’t believe that after 3yrs no one has addressed this issue. I just had the same problem. I reduced the chunk size thinking it would make it better for navigation of recorded video, but believe it causes loss of video. Going to increase the chunk storage to see if there are fewer losses.

Original thread sounded like the stranded worked and the solid did not. I researched, as you said, the solid has a lower resistance/meter than stranded. (Not typical in electrical world, but works here.) Thanks for the info.

Encoder takes a standard CCTV camera with a BNC connector and converts it to IP. AXIS M7001 for example.

I am looking at Ebay for a ONVIF IP PTZ 30X. I've had great luck using standard PTZ's on EBAY with an encoder. Just wondering if I can expect the same with IP. I'm looking to use BlueIris for my Video Management System. Any feedback?

Stranded wire has more surface area and less voltage drop across it. When IR Illuminators kick in you may be experiencing the difference in voltage drop between solid and stranded. You can scale back on your IR through the camera menu, or even turn it off to see if it makes a difference. Some...