Recent content by naamang

All my cameras are already on a 32-port POE switch, and the NVRs are configured to not sync with cameras. They are now out of sync with each other by several seconds but still one hour ahead. I had the same issue when the NVR was master time sync.

It's only happening with Dahua cameras in my case. All my Hikvision cameras are good. Some of the Dahua cameras will change to -4:00 and others will stay at the correct -5:00 but they all forward an hour and they all uncheck the NTP box by themselves. I've just given up on them to maintain my...

Thanks

Thanks

Thanks. I read on the NetTime website to ensure that the Windows Time Service is disabled along with any other NTP servers but didn't say how to do this. Did you have to do that to get this to work? If so, how do I go about doing that?

I'm a bit confused. You said in your first post to uncheck the NTP & DST boxes on the cameras and sync with the NVR that syncs with my PC via NetTime. Then in your last post you're showing most of your cams having the NTP & DST boxes checked and the cams syncing with your PC via IP? Is the...

I can find a single port injector around here somewhere tomorrow and give that a shot but don't know what that will accomplish if it does fix it. None of my NVRs or iVMS are configured to sync time with the cameras, I unchecked the time sync box on all three. Thanks for the assistance. I may...

one is a SD50432XA-HNR two are SD49425XB-HNR and the forth one in by Empire Tech but is Dahua camera rebranded.

Okay, downloaded Pale Moon browser and get the same issue. I sync with PC and it's good for a little over a minute then goes forward an hour at the top on the next minute.

All my cameras are connected to a 16-port POE switch as are both my Dahua and Hikvision NVRs. I set them up it this way so I could access all my cameras on both NVRs and via the PC's iVMS-4200. I just signed into my Dahua NVR and clicked the "E" symbol and it opens the camera's IP, with my...

I'm using Google Chrome and have been for years. No issues getting any of the other settings to stick. I'm not finding the time setting for each camera in the NVR interface, only IVS rules, presets and the like. I am seeing the time being correct for a short time in the NVR's camera footage...

Yes, tried that already, as listed in the thing tried in my original post. It will change to the correct time but then change back when it get to the next full minute mark.

Well, I just checked my ISP's router time settings and it's set to Eastern Daylight Time but it's also saying UTC-04:00, where my cameras are saying UTC-05:00 for Eastern time. Should I trying changing my router to UTC-05:00 Central Time?

Well, that last all of about 5 minutes and then went forward an hour again. Signed back into the camera setting and found that it has unchecked the NTP box and is now displaying the wrong time again,

I just verified that Automatic Time Sync is unchecked on iVMS-4200. Thanks