Recent content by Taurus24v

Yea it dose look similar to the nvr's settings.

I think I got it.. after removing the cam from the original dvr and putting in the settings and restarting the cam it was working. I was also able to set it back at H.265 and 30 fps and in basic mode and it still worked had to be old nvr forcing it to do what it wanted not letting the setting...

So all the cams are on my network not in to the nvr. My plan was to remove the nvr once I get this working nvr are .11and .12 blue iris .37 and cameras are .220. I changed the setting in the camera to what you said now blue iris shows 2.1 MP 2.04/1.0 fps 980 kB/s still getting the message check...

The second one is the camera settings.

h hope this helps.

I have 8 wd ip cams set to 30fps and I frames to 60. But blue iris has the frame rate at less then 1 and is giving me the yellow triangle and check frame rate/ key most of the time. Sometimes the frame rate is good and the triangle goes away. I also have 4 annke cameras with no issues. Don't...