Recent content by Wirepower

Ok The update is, I’m back online thanks to you Alastair.

Ohhhhhhh ok well then. That makes it easier. I thought I was putting in the ip it was specified. Awesome. Will give it a try and get back on progress. Thank you soo much for your help. :) really appreciate it

Yeah from boot loader... suppose that would make sense for SADP not to find it. Will try connect to it via switch, however how will I find the ip of the nvr So when I do the update and it request for the ip of device(nvr) and tftp server(pc local ip). Would I need to try find the nvr IP by...

Es thanks got it working. Now my issue is the nvr is set to up 0.0.0.0 when I check it on SADP and when I enter that as the device ip and my pc computer for the tftp server as 192.0.0.64 and it’s direct wired from pc to nvr it comes up with up error

Ok I’ve got it connected with null cable and a USB to serial cable. When I press ctrl-u to cancel boot operation, pressing U to upgrade doesn’t do anything? Does the tftp server need to be running for this to allow the u for upgrade to work?

If I don’t have a rs232 interface on my pc, will the USB to serial cable not work?

Ah ok. Cause I did try my serial ttl to USB and it wasn’t connecting on putty. will go out and buy a null modem cable and try that. Just hope I got a serial port on one of my PCs.

Anyone do this for a 7700 series. Can’t seem to find the serial port on the main board. Do I just connect it to the d9 plug at the back of the unit?