Search results

I’ll look into it. Thanks Sent from my iPhone using Tapatalk Pro

Thank you so much. I’ll be trying next weekend. I’ll keep you guys posted. Sent from my iPhone using Tapatalk Pro

Hi guys. It has been a long time since my last time around. My whole cam installation have been in hold for a while due to a lot of work and personal stuff. However, I was finally able to mount almost all my cams. I came back due to having one issue. Look at the picture attached. One of the...

@DLONG2 Thank you! That’s what I did and worked perfect. Now I have to create a rule just to allow few devices to access the BI PC when connected at home. Right now all devices can. Sent from my iPhone using Tapatalk Pro

UPDATE: I configured two IP cams and able to see them in BI. I appreciate all help I got from you guys. However, I have several questions: 1. I do still have access to internet on my BI PC. I’m I missing a rule or this is they way it supposed to be? 2. After creating the VPN and users, I am...

I was able to do it after multiple attempts. I did it through the port setting instead of the device. Sent from my iPhone using Tapatalk Pro

I have changed it in both UniFi controller and Network controller in PC. No luck. Sent from my iPhone using Tapatalk Pro

Thank you for your advice. I was able to add my first camera with static IP address to the BI network. Now I’m having issues trying to place the BI PC with static IP to BI network. Despite all efforts it goes under Corporate LAN instead of the BI LAN Sent from my iPhone using Tapatalk Pro

Well, I connected my Camera directly to my BI PC and was able to access it. Changed both passwords (admin and ONVIF) and IP address. I will be connecting it to the switch and see if it works. I just want to make sure that it doesn't access the internet. I'll keep you posted. Thank you...

Yes it shows up in the Topology. I did disabled the BI PC firewall. Didn’t work neither. I tried placing a static IP address and didn’t work. I used Dahua Config tool and it shows up but it appears as “uninitialized”. When I try to initialize, this is the error I get... Sent from my...

Thank you both for replying. It shows up in the topology but can’t ping it. I can ping other devices in same switch. Maybe is the BI PC firewall? Sent from my iPhone using Tapatalk Pro

I’m currently trying to bench test all cameras before I make changes to the network and I’m unable to find the camera. I’m connecting the BI PC as well as the camera to one of the US8 switches (port 8 with pass through). I don’t know what I’m doing wrong. Sent from my iPad using Tapatalk Pro

I just want to protect the system from internet. So I should follow your VLAN instructions then. I’ll try during the week and keep you posted. Thank you for your feedback. Sent from my iPhone using Tapatalk Pro

This is what I have so far. I was planning to add the BI PC as well as the cameras to the 16 port POE switch but I don’t know if that way I can isolate them. I will appreciate your help. Sent from my iPhone using Tapatalk Pro

Hi guys, I just finally got all my hardware to start installing and would appreciate some of your help. I’m going to make a diagram of what I currently have with my UniFi System and would appreciate if you guide me to add my new PC with BI and some Dahua I bought from Andy. Currently I...

Ok. I got my system up and running. I did change my Z-Wave devices to my alarm panel but I really don’t like the options it provides. I did it because I’m constantly having issues with my SmartThings hub. Even my wife is telling me “that @&$?! System is broken again”. So I decided to switch it...

Figured it out. The system got an update and I was able to add all door sensors. I’ll install two PIR sensors tomorrow. Sent from my iPhone using Tapatalk Pro

I got stocked last night trying to add my recessed door sensors (pg9307). It looks like the panel registered them but no triggering when magnet pull apart. I wonder if any of you could help me. Tech support is already gone for the weekend [emoji3525] Sent from my iPhone using Tapatalk Pro

I started programming the panel and installing the wireless sensors. Sent from my iPhone using Tapatalk Pro

Understand. However, I would get a lot of false alarms due to moving of bushes. Sent from my iPhone using Tapatalk Pro

I didn’t realized that you were who installed the aluminum plate. Anyway sounds like a good idea if you want a better angle. In my case I have a Uniden which is similar, but is mounted on the sidewall instead. I think yo got a good angle. Sent from my iPhone using Tapatalk Pro

@Tom Lorek Aren’t you concern about someone tampering your camera ? Sent from my iPhone using Tapatalk Pro

Just got my panel with some sensors in the mail yesterday. Will post some pics and feedback later when I get some time to install it. Sent from my iPad using Tapatalk Pro

Here’re the pics from the install. Pretty easy. This is the front of the G3 The following 2 pics is to show you that it has 3 available spaces for extra drives 3.5” and 2.5” Mounting screws installed in the 4TB WD Purple HDD Final installation of the drive with the power cable from...

Yes you only need the SATA cables and the mounting screws. The power cable comes from the power supply which is already there. I’ll be getting them today. I’ll take pictures so you can look at what I’m talking about. Remember that mine is G3. Has the optical drive, SSD M2 (which is like a...

Thanks again for the suggestion. I’ll do that. What about the cameras? Should I go with the IPC-HDW5231R-ZE turret? I like the idea of placing a Dahua dual Starlight IPC-HDBW4231F-E2-M/M12 in the porch but if I put a doorbell, do I really need it? Sent from my iPhone using Tapatalk Pro

Thank you all for your feedback. I will have to sit with my wife and convince her for the new locations. I really don’t see it hard to put them lower in the garage. I can run the wires through the wall from inside of the garage. Regarding the entrance I can try pulling the cable down. The...

I was planning to leave those at the soffit for few reasons: 1. WAF 2. Cables already there 3. Was wondering if I really need to do LPR Still, I accept you guy recommendations. Sent from my iPhone using Tapatalk Pro

Any suggestions other than Door Bird? I’m also thinking about pull it back to the attic and get 2 cat6 with a pOE extender. Do you think this should do the work? It’s going to be hard but possible. Sent from my iPhone using Tapatalk Pro

I looked into Door bird but a bit expensive for a doorbell. The one I got, Uniden doorbell, is giving me a lot of problems with connection a stability. Sent from my iPhone using Tapatalk Pro