Search results

Two years on and I had to format my harddrive losing a lot of stuff including my Blue Iris settings. This post came to my rescue yet again. So i thought it only fair to say thanks again to all the contributors and particulary Old Timer. Cheers Lads :)

Update. I gave this some thought and decided to check out if there was any updated firmware for my Dahua NVR4108HS-8P-4KS2. There was, so after a bit of faffing I managed to download the BIN file to a usb drive on my pc. I then put the drive in the NVR usb port and went to the system upgrade...

Hi Folks, I'm having an almost identical issue. I'm running a Dahua 8 channel network dvr with 8 Dahua ip cams. Everything is as perfect as it ever was through the dvr. I also run Blue Iris and Pale Moon through my PC to channel the images through to another room. I have both as I originally...

I tried it, IT WORKS! Thank you so much, hard to believe a guy in Glasgow Scotland is getting help from a guy in Oklahoma USA, but hey, it works and I am so grateful for the help. Thanks again :thumb: I just need to try and get the CPU % down, it's running at 100% when viewing all eight...

I put the first line in the "params" box underneath the "main stream" box but it then said it error no camera found. Same thing happened when I tried the second line in camera 2. In the main stream box it has "/cam/realmonitor?channel=1&subtype=0&unicast=true&proto=Onvif" as its value. This...

This is what I've got. I have changed the password to the NVR password, other than that, it is as it comes up. Cheers.

Hi, I gave this advice a go but to no avail. I put in camera no's 2,3,4, and 8 in camera selection but it always shows cam 1 view with the NVR ip address. So, to cut a long one short, after another two hours of trying to get this operational I'm still at the same point. My other half is working...

A bit harsh, lol, but deserved given my weak self deprecating joke :embarrassed:

I thought it was going to be quite straightforward to register the cameras on BI. Beginning to wish I'd just got the trial version but after reading all the positive posts I thought it was an idiot proof set up, I must be a better idiot than I thought!

It's a bit messy but here's what I can glean from Pale Moon browser CH Camera Name Modify Delete Status IP Address Port Device Name Remote Channel No. Manufacturer WEB Browse Type...

Hi, I bought BI tonight and I'm trying to configure it to show my eight Dahua cameras. When I do a search for cameras I keep getting the Dahua NVR, IP address 192.168.0.19. I've tried manually putting in the individual cameras IP address eg Cam 1 as 10.1.1.65:1 but BI can't seem to find it. I...

Ordered mine yesterday from Andy through AliExpress.

Thanks for the replies. Anyone else got any thoughts on mounting the SD1A404XB-GNR vertically?

I have a couple of these SD1A203T-GN and I was wondering, is the SD1A404XB-GNR basically an updated version? I have my cameras mounted in the eaves of the roof but I'm wanting to place one (probably a SD1A404XB-GNR) at the apex of the roof at the gable end. Can this camera be fitted vertically...

Sorted it. Had a brainwave and logged on to my router to check connected devices and the NVR was not on the list. I removed and refitted the NVR/Router cable at both ends and refreshed the page to see the NVR was now on the list and connected.Login page now back to normal and images all ok too...

Hi, Me again! So I've been using Pale Moon for just over a month now and it's all been good. But for the past week when I open it up it does not run as it should. I have my Dahua NVR IP address as my home page as I don't use PM for anything other than the DVR but lately it is just stalling...

Thanks for the reply. I have tried SmartPSS but as I view on a 4k screen the resolution has to be reduced to see it (SmartPSS) in an acceptable size, then rejigged back to view my pc (Win 10) on the same monitor at an acceptable size. Too much hassle. That's why I use Pale Moon, it seems to...

Hi,me again! I am using Pale Moon to view my cameras but if I leave it for about 30-40 minutes I get the error message "connection time is out" is there any way of stopping this as I have to log on again and pick the camera views I want to see. When I reload and log in on the top left is says...

That is what was stopping me. I entered the NVR password on the camera log in and bingo! I was in. Thanks again. I can now access the individual cameras and play with all the setting through the camera interface (exactly like the one in nymphaeles pic) so now I have switched off the IR on two...

Thanks for the info. I tried and it all went well until it asked for username and password for the individual camera. I thought it was admin+admin and tried that but it is not accepting. Just past midnight and I'm working in the morning so I'm off to bed. I'll check again tomorrow if you can...

Ok, I was not aware of that. I have now downloaded SmartPSS_International_Win32_IS_V2.02.1.R.180619 which seems to be the latest version. After tweaking the screen resolution I got it to run ok ie it sees all eight cameras etc but I still cannot find where I can switch off the IR lamps. The...

This is not my screen but 99% the same.

Ahh, I see where it's going wrong. My SmartPSS view does not look anything like the one you are showing me. I can't get a screen grab to show you but it does not have the Dahua logo where yours is, my version has "Web service" at the top left corner, and on the right side there are arrows for...

Downloaded Pale Moon and my SmartPSS screen resolution problems have been resolved. Many thanks from a very grateful Scottish forum member. Now if anyone can point me to a solution to switching off the IR lights on individual cameras I'd be a very Happy Chappie!

This is what I've downloaded and run. General_SMARTPSS-FLIR_Win32_ChnEng_IS_V2.002.0000007.0.T.190122.exe

Thanks for the help. If I use this browser (Pale Moon) do I just run SmartPSS and go from there? I have managed to get SmartPSS working through the ie plug in (Cheers Looney2ns) but my resolution as all over the place with the preview screens masked off in areas if that makes sense! Does it...

Switched to 1920x1080 and managed to log in. So far so good.Now it says @please install plugins first!" Will I not be able to access my cameras through my router and NVR? I am wanting to access the cameras to disable the IR lamps on two of them as I'm getting too much glare from white roof...

Hi, Thanks for the prompt replies. I'm using a Panasonic TX-58AX802B which is a 58" UHD LED screen as my monitor. I have installed the IE plug in and the log in screen is there but again it's tiny. Tried to do a screen grab but it(Chrome) says it will not run an extension withing another...

Trying to install Smart PSS on a win 10 64bit PC. I can download and install but the SmartPSS interface is tiny. So small i cannot make out what is what and the text is unreadable. I can close it as I know where the close cross is but nothing else. I'm doing this so I can view the cams through...

I gave that a try but to no avail. Just in from resetting them all and they are all running fine again. Thanks for the help.