re: Motion Detection outside "AREA(s)" I drew.
_ DS-2CD2432F-IW { F/W Vers V5.3.0 build 150423 }
HI,
How can I stop the recording of motion outside the "area(s)" I defined?
I use two of these cams, both are detecting/recording on motion outside of the zone(s) drawn/selected on the
Advanced Configuration-MotionDetection webpage.
I have used both Expert & Normal and have Enabled/Disable that Dynamic Analysis; & of-course repeated Reboots.
On the image below you can observe
thanks for assist.. O.T.
p.s. sorry if this has been answered before ... search was not productive
_ DS-2CD2432F-IW { F/W Vers V5.3.0 build 150423 }
HI,
How can I stop the recording of motion outside the "area(s)" I defined?
I use two of these cams, both are detecting/recording on motion outside of the zone(s) drawn/selected on the
Advanced Configuration-MotionDetection webpage.
I have used both Expert & Normal and have Enabled/Disable that Dynamic Analysis; & of-course repeated Reboots.
On the image below you can observe
the (2)SmartEvents(blue) and
the Red-Box/Zones which I define, but also
the "Green Boxes" where the camera detects motion;
the Red-Box/Zones which I define, but also
the "Green Boxes" where the camera detects motion;
that's fine, but I don't need it "recording"
thanks for assist.. O.T.
p.s. sorry if this has been answered before ... search was not productive