Hikvision - Clearing Passwords and/or Loading Firmware via TTL Serial

Joined
Jul 22, 2019
Messages
11
Reaction score
0
Location
India
i am also unable to make device to restore its default setting
 
Joined
Feb 1, 2018
Messages
8
Reaction score
0
Cho mình hỏi phần này có thay đổi được Serial SN 9 chữ số thành mã Serial SN mới khác được không
 
Joined
Feb 1, 2018
Messages
8
Reaction score
0
Các bác cho e hỏi muốn thay đổi serial SN 9 ký tự p2p của hik thành mã serial mới khác không ạ?
 
Joined
Feb 1, 2018
Messages
8
Reaction score
0
[QUOTE = "alastairstevenson, chào: 386092, thành viên: 1907"] Ý của bạn là mã minh minh, không phải là sê-ri?
Không có gì đặc biệt. [/ TRÍCH DẪN]
Cành b! Ý tưởng thay đổi mã số sê-ri Số: c23186081 của DS-7104HGHI-F1 thành mã sê-ri khác. Ex:
c23186081--> A43196021
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,930
Reaction score
6,778
Location
Scotland
="nguyenh0acctv, post: 386358, member: 48624"]ành b! Ý tưởng thay đổi mã số sê-ri Số: c23186081 của DS-7104HGHI-F1 thành mã sê-ri khác. Ex:
c23186081--> A43196021
The idea to change the serial number code: c23186081 of DS-7104HGHI-F1 to other serial code. Ex: c23186081--> A43196021
Maybe by this method : How to - Fix your 15-beep-bootloop Hikvision DS-76xxN-Ex NVR, or convert to EN and make it updatable
But I do not know where that data is held on a DS-7104HGHI-F1[/QUOTE]
 

srhutch

n3wb
Joined
Oct 12, 2019
Messages
1
Reaction score
1
Location
uk
Just to say thanks to the information on this thread I’ve managed to unbrick my DVR

This bit was a life saver

setenv bootcmd ';update'
 
Joined
Feb 1, 2018
Messages
8
Reaction score
0
[QUOTE = "alastairstevenson, điểm: 386090, thành viên: 1907"]
Đối với một trong những máy tính - có, trong đó là có thể. Khi bạn chỉ có thể làm như vậy
[/ TR Đăng nhập]
Bẻ khóa cách thay đổi nó dk không? tôi mã hóa nối tiếp icloud của dvr hikvison thành công nối tiếp icloud trên ex: 12345678a thành 12345678B
 
Last edited:

Ecotech

n3wb
Joined
Oct 31, 2019
Messages
2
Reaction score
0
Location
Romania
Would this method (usb->ttl firmware push) work, if trying to reanimate a DS-2CD2021G1-IDW1, that has been password locked and promtly forgotten ? Since Hikvision Europe is a brick wall, for all the support it gives and for some reason, even though it has a damn reset button, it won't work.

Edit: any reason why the reset button (next to the card slot) would do nothing? What I did: power off the camera, push the reset button in, power the camera on, keep holding the reset button for 20 seconds or more, let it go. It should supposedly show up as inactive in SAPD, but it still reports as active and can't do anything to it. Firmware 5.5.60 build 180711.
 
Last edited:

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,930
Reaction score
6,778
Location
Scotland
What I did: power off the camera, push the reset button in, power the camera on, keep holding the reset button for 20 seconds or more, let it go.
That's the correct method, it should work.
If you can figure out the right firmware for your camera - maybe this is it - DOWNLOAD EU PORTAL - the Hikvision tftp updater if its active will result in a camera reset to defaults.
Ideally the same version - though the 5.5.60 isn't in that list.
 

Ecotech

n3wb
Joined
Oct 31, 2019
Messages
2
Reaction score
0
Location
Romania
c1 export shot.PNG


It doesn't seem to do anything via tftp either, though I will try it again later. Worst case, I'll take it to pieces and see what is going on inside, maybe the reset button isn't working right in the first place?

Edit:
1. reset button is electrically functional, just not doing anything to actually reset the damn thing.
2. removed the cell battery from the board, tried to reset it then, still no joy.
3. Tftp updater: nope, doesn't update.

Since hikEU still doesn't provide the reset file, no choice but to attempt the firmware push via the board.
 
Last edited:

Wirepower

n3wb
Joined
Nov 4, 2019
Messages
10
Reaction score
1
Location
Australia
Anyone do this for a 7700 series. Can’t seem to find the serial port on the main board.
Do I just connect it to the d9 plug at the back of the unit?
 

Wirepower

n3wb
Joined
Nov 4, 2019
Messages
10
Reaction score
1
Location
Australia
Ah ok. Cause I did try my serial ttl to USB and it wasn’t connecting on putty.
will go out and buy a null modem cable and try that. Just hope I got a serial port on one of my PCs.
 
Top