IP Cam Viewer Pro

Chris J LaBoda

Young grasshopper
Joined
Sep 7, 2019
Messages
34
Reaction score
3
Location
Ohio
I am having a problem viewing my Dahua cameras connected to a Dahua NVR using IP Cam Viewer Pro with Roku. Only two cameras will show up using 192.168.0.108 which is the IP address of the NVR. The cameras IP addresses are in the 10.1.1.65 to 10.1.1.74 range, I think this is where the problem is. Do I need to change the cameras to 192.168.0.XXX range?
 

bigredfish

Known around here
Joined
Sep 5, 2016
Messages
2,927
Reaction score
3,208
Location
Florida USA
What model NVR?

If built in PoE they must be 10.1.1x and are assigned by the NVR that way
 

TonyR

IPCT Contributor
Joined
Jul 15, 2014
Messages
4,495
Reaction score
4,301
Location
Alabama
On the app's configuration page, put in the channel number of the camera to the right of the media port.
In other words, if you have 6 cams then you'll have 6 different config pages, all with the same IP of the NVR and all other info the same but channel # will be different for each of the 6; the ch# will be 1 through 6.

Online help here, (may be different for Android).
 
Top