New IPC-T5442TM-AS problem (now fixed)

harb

Young grasshopper
Joined
Apr 10, 2018
Messages
35
Reaction score
14
Just got my 5442 with firmware, 2.800.0000000.8.R, Build Date: 2019-09-02 - but it has the warning triangle. I have sent Andy the .dat file for fix.

Another thing I noticed it works fine in SmartPSS on my PC, but when viewing from the iOS iDMSS Plus app, or from my NVR, I can connect to the 5442, it displays the stream for a few seconds then the streams stops. On the iDMSS app the error is "Login timeout", on my NVR the error is shown as "Device offline". Works fine when viewing from Chrome browser or SmartPSS. Any ideas please?
 

harb

Young grasshopper
Joined
Apr 10, 2018
Messages
35
Reaction score
14
Did a factory reset and that’s fixed the issue. Camera seems to work fine now. Wish I had tried that before wasting 3 hours messing about with it.

what’s the best audio codec to use. This 5442 only seems to have 8k in the g.711a codec?
 

harb

Young grasshopper
Joined
Apr 10, 2018
Messages
35
Reaction score
14
The quality of this 4mp 5442 compared to the 4631c-a Chinese hacked versions is something else. I have turned the IR off on the 5442 as I had enough IR light coming off from my other cameras and the 5442 is crystal clear in pitch dark outside. It’s something else. Think I’m going to start replacing all my Chinese hacked cams with these 5442’s slowly over the coming months. Good job Andy
 

harb

Young grasshopper
Joined
Apr 10, 2018
Messages
35
Reaction score
14
Only thing now is IVS events aren’t triggering! Hopefully dat file from Andy will fix that.
 
Top