splitting 1 Ethernet cable to 2 cameras

fjkum

n3wb
Joined
Aug 4, 2016
Messages
5
Reaction score
2
Why would it not?
So then my next question is, the 2 Poe cameras share the same data path to that single tl-poe150s Poe injector?

Sent from my Mi A1 using Tapatalk
 
Joined
Jun 15, 2018
Messages
2
Reaction score
3
Location
USA
Last edited:

fjkum

n3wb
Joined
Aug 4, 2016
Messages
5
Reaction score
2
Here's a post I made regarding this subject...


View attachment 49830
You have a very neat setup there. I have purchased this similar unit, but have not really setting it up yet. I have tried connecting the input side with a midspan Poe injector IEEE802.11af and one ip camera and it is able to power up the camera. I will try connecting a second ip camera once I received it, to verify if it still can power up the second unit and ability to send data over it. I believe it can't support the 3rd ip camera because of the input is only IEEE802.11af and not at.

If it works, I will highly recommends this little China product to everyone that need to have the similar setup.

Hope anyone here can share my thoughts.


Sent from my Mi A1 using Tapatalk
 
Top