More info might help...I have an Axis p3364 I can see it If i use a browser or in BI menu with path, but If I try to add it to B.I.5 It says no signal ..help
yes did thatMore info might help...
In BI, did you put in the cam's IP, username/password and click on the "Find/Inspect" button ?
rtsp:/<ip>/axis-media/media.amp
I tried all suggestions and its still not workingI have an Axis p3364 I can see it If i use a browser or in BI menu with path, but If I try to add it to B.I.5 It says no signal ..help
OK, I understand that you can log into the cam's webGUI with a browser and see video "Live" but...what do you mean by "... I can see it....in BI menu with path" ?I have an Axis p3364 I can see it If i use a browser or in BI menu with path, but If I try to add it to B.I.5 It says no signal ..help
OK, I guess it's too late for that screenshot.Thanks for the help I found that If I load B.I. 4 Everything works but if I switch to B.I. 5 I can't load the axis p3364 even though the settings are the same. I have 2 other cams that work on B.I.5
OK, I understand that you can log into the cam's webGUI with a browser and see video "Live" but...what do you mean by "... I can see it....in BI menu with path" ?
EDIT: please post a screen shot of BI's "Camera Settings" => "Video" tab => "Configure" button
on the general screen it shows a highlited pathOK, I guess it's too late for that screenshot.
That is what I have used for 5 years It has always worked. I can type in the address a colon and port .in a browzerWhere the heck did ":9083" come from on the end of the IP address? The default RTSP port for that cam is 554, according to the specs, try deleting all but the IP address up top, no need for a colon and port.
I just tried 554 didnt workThat is what I have used for 5 years It has always worked. I can type in the address a colon and port .in a browzer
on screen shows media/video /rtsp port 554 Discovery/ onviv port 8999I just tried 554 didnt work
I tried it without the port doesn't workI just tried 554 didnt work