Hikvision DS-KD8003-IME - New video doorbell

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
I created that thread!!!! :) i'm that user on HA forums
but i posted there SDK + ISAPI commands, not payloads to send with xml, to change config?

edit: ah , maybe some commands are in the API docs :)

probably not the one for adding users
 

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
yeah, maybe next time :)

PS: i also linked btw all ISPAPI docs, but seems the one you posted above was not included


edit: nm , in my zip, its al older version of it
 

oknet

n3wb
Joined
Jul 2, 2015
Messages
24
Reaction score
10
Hi all, I had the great idea to update my 8003 to firmware version V2.2.52 build 211126
It no longer connects to my FreePbx and now it acts like a point-to-point doorbell with my inner station KH6320
Any hint on reconfigure as standard sip device ?
Thank you
 

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
Are the sip options gone then? Are you not able to configure it again? From what firmware version are you coming? If from older V1, try also updating your ivms software
 

oknet

n3wb
Joined
Jul 2, 2015
Messages
24
Reaction score
10
Updated ivms as well , now there's an option "Enable VoIP gateway" inside Network settings, requiring sip registration parameters.
The 8003 registers to pbx, but I cannot see a "dial" option to dial a number once button is pressed....
Or better, there is a "Press button to call" section inside "intercom" but it let me choose between two schedule event , not a sip number.....
At least this is what the last version of IVMS4200 shows.....
 

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
Yes ,those settings are moved to another screen on intercom settings, there is a page where you can define numbers to call, where you can assign a room and sip nr
 

oknet

n3wb
Joined
Jul 2, 2015
Messages
24
Reaction score
10
Yes ,those settings are moved to another screen on intercom settings, there is a page where you can define numbers to call, where you can assign a room and sip nr
Yes I can create a room with a sip number but....where can I set which room has to be called once button is pressed ??
 

oknet

n3wb
Joined
Jul 2, 2015
Messages
24
Reaction score
10
Is perhaps "button settings" field into "press button to call " section to be filled with room number ??
(I can't try it now , as I wake up te whole family :lol:)
 

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
Yes, it's indeed button settings, there you can define a lot of numbers corresponding with 1 sip nr...

Just curious , how do you handle your sip softphones + indoor stations? You don't see any video before pickup (early media) right? Only video after you pickup? Do you use ring groups?
 

oknet

n3wb
Joined
Jul 2, 2015
Messages
24
Reaction score
10
I use Ip phones for audio answer only (and eventually # to door opener) and 6320 indoor station , all into a ring group.
Yes, no video until video call is picked up, early media would be very appreciated , is there any workaround ?
 

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
No, already looking 2 years for a solution, not possible :)

I requested on linhome to have manually defined an RTSP stream...

There is one app on appstore, called vphone, no develop on it anymore, but on that app you can manually specify the RTSP stream for your doorbell
 

oknet

n3wb
Joined
Jul 2, 2015
Messages
24
Reaction score
10
I read of someone unable to have it working with FreePBX but solved using Grandstream UCM6202 pbx (asterisk based)
Early media is something having to do with asterisk however..... it would worth same low level investigation...
 

NoFate

Getting the hang of it
Joined
Oct 24, 2020
Messages
479
Reaction score
63
Location
Belgium
I believe grandsteams supports sip headers , but you need to define in the app I believe... But it's if I'm not mistaken, an still image only, not video
 

oknet

n3wb
Joined
Jul 2, 2015
Messages
24
Reaction score
10
I read Success …. I thought you found the early-media solution this night……:banghead:
 
Top