OK. Thought that if you could get the video, then mess with the mic as that has caused issues with me in the past with old Dahua cams.
Other than SightHound I think it was called, I haven't used any other s/w NVR's. Others would have more experience. I didn't like SH for it was a resource hog...
OK. For some reason I can see both now.
To me I would try
preview.asp
...as the URL addition and see what that resolves to.
Otherwise the "Preview.json?" line...
Matt
Ok. Sorry for the delay as I was on vacation.
I see that you mention that you got a connection with the generic driver. Thats good to say you can connect. Make sure those inputs are off to get green. Now I think the stream data is what needs tweaking. We need to duplicate what Vlc uses.
Also...
One thing I notice is that you have a yellow ! on the connection. That has to have a green arrow signifying connection. Check logs and make sure its using the right credentials.
Sure.
Steps to maybe help with your setup...
1. I would use the Universal Driver to start. Make sure you are using the correct Username and Password. My issue was it used the wrong one and wouldn't connect. Under Servers, Recording Servers you'll see a green arrow showing your connected.
2...
Hi,
I just went thru an MS Express to Express+ and got familar with MS again. Had a couple of cranky Foscams I wanted to add and got them working.
What are your settings under hardware? Driver?
Then let's see what the network calls are.
Post some ss's if you want to take another stab at it...
Yes, I have 2 Foscam's setup "F18910W" versions. These are setup as Devices 4 & 5 as shown...
*Make sure the Microphone is OFF as stated above.
Thanks, Matt
+1
I know an older thread but just in case anyone is looking into setting up Milestone....
That's where I bought my setup from. Very happy w/ customer service.
Re: If I'm using something like Sighthound, would I still need an SD card in the came
I bought SightHound and found while it works really well for motion detection, my cameras would drop out (causing green screens) for a few seconds and then come back on. I had 3 cameras on SH and the server...
I wanted to start this thread as a placeholder for an issue I'm having with one of my Hikvision IP cams. The cam has an issue switching from night/day every morning now. Switching from day to night mode is not a problem but going from night to day the camera just keeps cycling the day/night...