Recent content by ReviewG

My replacement project for the ones that I have is speeding up. These are extremely moody and sometimes like to forget that a camera should be a camera.

I have an LTS(Hikvision) NVR and All my camera's are Dahua. The only way I consistently get them to work properly is by setting them up as ONVIF within the NVR. Minus one really old Q-SEE(Dahua) that I have to setup as rtsp.

I have 4 of them, well two 4431c and two 4433c, I'm slowly replacing them with IPC-HFW4231T-ASE from Empire as I wanted better nighttime performance and a high frame rate. Totally worth the extra cost to have starlight and double the fps. Also I find the 4431c and 4433c can be slow to respond...

Turned out to be the onvif users needed to be edited with onvifdm and not just the camera web interface. Fixed and working well!

Ill have a look, the only option I have found is either "On or Off" for the Onvif authentication.

Just tried an RTSP test and I get Offline(Network Abnormal) *twitch*

I have slowly been ripping out all my old analog junk and switching over to POE IP Cams. Current setup is LTS Platinum 16port POE 4k NVR Q-See 3MP IP POE Varifocal Bullet Q-See 4MP IP POE Varifocal Dome Raytec Raymax RM50-50-POE Everything is working well. Now here is where I run into an...