Hmm, My camera did come yet, and your start talking? Not good, i had the "no signal" and if you on the road your stuck, can't pull the cable out to reset it, unless i tell my dog to do it! :laugh:You just had to say something, didn't you.
h:
Last night, for the first time, my LBW90S500 threw a "No Signal" in Blue Iris; manually rebooting the camera by disconnecting its cable at the POE switch resolved the issue.
You just had to say something, didn't you.
I don't suppose the 'scheduled reboot' is active in the camera configuration?
No Heh...we'll see! You take that bad JuJu and you stow it Mr. BP bummer! Good camera! Camera very good!
)
If you ordered from "Shenzhen Topxel Electronics Tech Co Ltd" then it takes a V E R Y L O N G T I M E. There an AliExpress timer that counts down and auto-cancels the order if the AliExpress vendor hasn't shipped by the end of the countdown. Shenzhen Topxel Electronics seems to wait to the very end of the countdown to ship. I would suggest that you send Shenzhen Topxel Electronics a *polite* email asking when the order will ship and stating that, if it doesn't ship soon you are going to have to cancel because you will be leaving on a trip soon. Be polite...remember that they are Chinese, not Americans so direct, frank and to-the-point may not have the same cultural effect that it does on a Yank.
After 24 hours on the new switch port there is no more "lost signal" issues with my Longse LBW90S500 Cyclops...and now that I think of it...I had my Longse LRDC60S500 RoboCat plugged into that same switch port (#4) and was getting the same Blue Iris "No Signal" error on the LRDC60S500. At the time I thought the LRDC60S500 was going bad and rebooting the switch always corrected the problem. Bad port...good cameras...confirmamundo!
The problem is...you!
Not me ! :rapture:The problem is...you!
