Help identifying generic nvr board

xavier00 · Oct 11, 2016

I would like to know if someone can tellme what board is this? I just want to find the right firmware
for it

i thought it was a nbd- 7808tbut it seems its not, firmware wont work

alastairstevenson · Oct 12, 2016

It looks like the serial console port may be the 4 connector holes, just left of D26? in the centre of the board.
If you connect a USB to TTL serial convertor, you may get access to the bootloader or kernel and get some useful information.

xavier00 · Oct 12, 2016

I took the bo

off,any clues????

xavier00 · Oct 12, 2016

This is the mistery board being sold all over the place, no brand no firmware no help from sellers

xavier00 · Oct 12, 2016

Outside they all look like this H.264 onvif p2p 8ch model NVR-1008

nayr · Oct 13, 2016

it looks like a Chinese made brick to me.

alastairstevenson · Oct 13, 2016

** found the location for a 4 pin header on the circuit board. i soldered wires to a TTL-to-serial converter so that I could monitor the console output during the linux bootup.

I presume you saw the above, on this post:
https://www.ipcamtalk.com/showthread.php/14439-is-there-a-quot-generic-quot-firmware-available-for-Hi3535-based-NVR-(owsoo-branded)?p=131423&viewfull=1#post131423
This is easy enough to do:

It looks like the serial console port may be the 4 connector holes, just left of D26? in the centre of the board.
If you connect a USB to TTL serial convertor, you may get access to the bootloader or kernel and get some useful information.

Search

Help identifying generic nvr board

xavier00

Getting the hang of it

alastairstevenson

xavier00

Getting the hang of it

xavier00

Getting the hang of it

xavier00

Getting the hang of it

nayr

alastairstevenson