Menu
What's new

Dahua Mini Black Face PTZ (SD29204S-GN & SD29204T-GN)

I

ipnoob

Young grasshopper
Joined
Nov 10, 2016
Messages
56
Reaction score
0
Yea I've started paying attention to the actual sensor size and light capture ability. Like the 2mp starlight ptz has a bigger sensor and obviously better light capture than the closest 4mp non SL version.

Does this translate to daytime quality too though.
 
nayr

nayr

IPCT Contributor
Joined
Jul 16, 2014
Messages
9,329
Reaction score
5,325
Location
Denver, CO
the 4MP's usually have very good day time capabilities; comparing my 2MP Starlight to my 4MP Bullet in the daytime the 4MP wins due to better PPF.. but at night the starlight kicks the 4MP's butt as I have shown.. is the benifit of the 4MP worth it? for me, no.. they are going bye-bye.
 
D

densma

n3wb
Joined
Apr 22, 2016
Messages
29
Reaction score
2
i have 2 SD29204S-GN. one can't be recognized anymore as a ptz camera in nuuo system. same as onvif manager..no ptz control. i can use all ptz feature from the web menu. i decided to test with blueiris and it works how does blueiris access camera?
any ideas why all of a sudden no more ptz feature.
 
nayr

nayr

IPCT Contributor
Joined
Jul 16, 2014
Messages
9,329
Reaction score
5,325
Location
Denver, CO
BI uses ONVIF I believe.. odd one camera works and the other does not; perhaps reset it to defaults and set it back up?
 
D

densma

n3wb
Joined
Apr 22, 2016
Messages
29
Reaction score
2
that did the trick.. i use onvif manager to do soft reset. i want to load backup config not sure if the issue was some configuration
 
M

mcorzine

Young grasshopper
Joined
Feb 29, 2016
Messages
40
Reaction score
13
Location
Illinois
Found the issue with my IR this evening. Got out the fluke 175 and diode checked the IR LEDs. They passes. Ran continuity back to the main board (I already tested that it was outputting 12vdc) and found a wiring pin connection out of place. Fixed that and now my IR works perfect!

As expected, the two IR LEDs are in series.
 
nayr

nayr

IPCT Contributor
Joined
Jul 16, 2014
Messages
9,329
Reaction score
5,325
Location
Denver, CO
mebe account lockouts; I suggest creating sub accounts for individual viewing apps so they dont end up locking eachother, nor the admin account out.
 
Tsikura

Tsikura

Young grasshopper
Joined
Oct 12, 2016
Messages
45
Reaction score
17
Mine finally got here after 3 weeks in shipping. Another order still hasn't left china (shipped out same time lol...). I hope it wasn't lost in transit. Can't wait to hook this girl up tomorrow.

The model I got definitely SD29204T-GN.
 

Attachments

Last edited:
N

nbstl68

Getting comfortable
Joined
Dec 15, 2015
Messages
1,399
Reaction score
322
Tsikura said:
Mine finally got here after 3 weeks in shipping. Another order still hasn't left china (shipped out same time lol...). I hope it wasn't lost in transit. Can't wait to hook this girl up tomorrow.

The model I got definitely SD29204T-GN.
Click to expand...
Would love to see some comparison pics vid of the T to the S just to see if much of a difference at all.

Sent from my SM-P900 using Tapatalk
 
Tsikura

Tsikura

Young grasshopper
Joined
Oct 12, 2016
Messages
45
Reaction score
17
Sadly I don't have an S. I don't know if the other one that's hasn't left China is the same model. If different, I'd definitely test them out but I doubt it.
 
N

nbstl68

Getting comfortable
Joined
Dec 15, 2015
Messages
1,399
Reaction score
322
Tsikura said:
Sadly I don't have an S. I don't know if the other one that's hasn't left China is the same model. If different, I'd definitely test them out but I doubt it.
Click to expand...
@nayre has done a great job reviewing the S...so just need some samples from your T.


Sent from my SM-P900 using Tapatalk
 
Tsikura

Tsikura

Young grasshopper
Joined
Oct 12, 2016
Messages
45
Reaction score
17
Yeah but it would have been nice to have a side by side comparison of the same scene.
 
Tsikura

Tsikura

Young grasshopper
Joined
Oct 12, 2016
Messages
45
Reaction score
17
Great. Exposure settings won't stick on this camera.


edit: Scratch that. Fixed by setting exposure to default. This pic going to be stretched since I'm not too worried about it right now. Darn cat staring into the IR of evil.
 

Attachments

Last edited:
J

jaderoyston

Young grasshopper
Joined
Dec 7, 2016
Messages
35
Reaction score
1
I have a lot of the SD29204T-GN models. Having a really hard time with bright spots. I cannot save the settings in the interface, there is not even a "save" button on the screen where I change the settings. The default of "WRD" "HLC" "BLC" are all "Close" and when I change any of those settings to an option nothing happens. When I navigate away and come back to this screen it is back to the defaults of all "Close".

Does anyone have a different firmware, old or new, I don't care that I can upgrade my cameras to that will allow me to change these settings?

For someone that has the SD29204S-GN model. Question here, is it possible for you to export your firmware and make it available for us with the "T" model to upgrade to ours?

Help is appreciated.

Thanks,HLC.PNG
 
Tsikura

Tsikura

Young grasshopper
Joined
Oct 12, 2016
Messages
45
Reaction score
17
Make sure you try a different browser. What's the firmware version on your version? As far as I recall, there is no save button for most settings. It just automatically does it. If you're having issues, try going to Default (under defog) and reset the backlight settings there. Then see if changes stick.
 
J

jaderoyston

Young grasshopper
Joined
Dec 7, 2016
Messages
35
Reaction score
1
I have tried IE and Chrome and they give the same screen, can't set or "save" and no changes in any of the options make a difference in the picture. I have been going back and forth with my distributor for days and they sent this photo as instructions. As you can see they have buttons below their preview screen for "default" "refresh" "save". Also their different setting titles are in a different order. I asked them to send a firmware and the .bin file cannot upload to my cameras. I get an no match message. I have uploaded a photo of the instructions they sent (they have buttons I do not have and order is different for the setting options) and a photo of my firmware version. version.PNG from distributor.jpg
 
J

jaderoyston

Young grasshopper
Joined
Dec 7, 2016
Messages
35
Reaction score
1
I have done all that to multiple camera with no luck. I feel like there has to be a firmware upgrade / downgrade that would have the save buttons.

All help is appreciated, fixing this image quality is very critical to my business. I may have to find another camera model if I am unable to fix this brightness on these cameras. I have not found any other cameras that have this nice of functionality though.

Let me know.
 
You must log in or register to reply here.
Top