no
he was talking about the SD49225T-HN which does NOT support auto-tracking
the SD49225T-HNI does tho
Dahua Mini Black Face PTZ (SD29204S-GN & SD29204T-GN)
- Thread starter nayr
- Start date
he was talking about the SD49225T-HN which does NOT support auto-tracking
the SD49225T-HNI does tho
tb10818
Young grasshopper
- Joined
- Dec 24, 2016
- Messages
- 48
- Reaction score
- 17
They make an hni version of that cam?!
nayr
IPCT Contributor
nope, I would hope so but never tried it
Madleonberger
n3wb
- Joined
- Oct 22, 2016
- Messages
- 2
- Reaction score
- 0
I've read through most of the posts and have yet to find a solution to my problem. Any assistance would be greatly appreciated.
Despite selecting every square on at least two Regions, the Motion Detection threshold meter never registers any activity - regardless of sensitivity/threshold adjustments. I'm running the default firmware - 2.212.0000.0.R.A.484.3N.NR, build : 2015-10-23.
Does anyone have an idea how to solve this issue?
Despite selecting every square on at least two Regions, the Motion Detection threshold meter never registers any activity - regardless of sensitivity/threshold adjustments. I'm running the default firmware - 2.212.0000.0.R.A.484.3N.NR, build : 2015-10-23.
Does anyone have an idea how to solve this issue?
nayr
IPCT Contributor
what browser are you using? is the plugin loading? I dont think you get any activity on the setup page w/out the plugin loaded
Madleonberger
n3wb
- Joined
- Oct 22, 2016
- Messages
- 2
- Reaction score
- 0
Thanks for the reply. The plugin is loading. I'm using Internet Explorer 11 on Win 7 (32bit) (i've also tried IE 11 on Win7 64 bit). All other functions of the camera behave as expected.
jaderoyston
Young grasshopper
- Joined
- Dec 7, 2016
- Messages
- 35
- Reaction score
- 1
Hi Nayr, in desperate need of a new Firmware. Impossible to pull down the good firmware from the other camera I was told by an engineer they have it encrypted and password protected. I had uploaded this firmware to my cameras, the streaming is fine. But something is crashing our recordings in our server. Ever since I uploaded this firmware to a number of the bad cameras, our system went all out of wack. This is a big problem for us.
Is there any chance that you have any other firmware version for this camera. I need to try a few others and keep running tests to get our recordings back on track.
Thanks!
PTZ function works on my hikvision DS-7608NI-E2/8P but motion recording stops working if I hit any presets.
Thank you for the information. What ptz are you using?
dahui mini blackface, the one listed in the beginning of the thread. I've also used the huisun mini ptz with the nvr, ptz function works with that also
jaderoyston
Young grasshopper
- Joined
- Dec 7, 2016
- Messages
- 35
- Reaction score
- 1
Can I set this camera up to automatically pan with motion on part of the screen to follow motion?
tangent
IPCT Contributor
- Joined
- May 12, 2016
- Messages
- 4,416
- Reaction score
- 3,648
Can't you "sort of" do something like that with presets...say have it pan and zoom into a particular spot using a preset if motion is detected in a certain grid? I have not used one yet but I thought that was something you could do with presets....So like have a yard cam with full FOV that then pans & zooms to the front door if motion is seen in a defined area....not motion tracking but may be better than nothing.... I may be wrong about how that could work though so somebody correct me if I am.
marigo
Getting the hang of it
Yesterday I received my DH-SD29204T-GN and of course tested it immediatly. I attached a TP-link TL-POE150S to power the camera and it began with a sort of POST.
After this was executed I noticed a strange hearable noise from the camera when it was idle. Maybe it has to do with the PoE injector to deliver the current the camera ask for.
So I switch the power via a 12Vdc adapter (2A) but The camera doesn't boot. (it's a cheap adapter from AliExpress so maybe it has also problems to deliver the expected current) I ordered a 12Vdc 3A to check it out.
Anyone else can hear a sort of noise from the camera when it's idle?
After this was executed I noticed a strange hearable noise from the camera when it was idle. Maybe it has to do with the PoE injector to deliver the current the camera ask for.
So I switch the power via a 12Vdc adapter (2A) but The camera doesn't boot. (it's a cheap adapter from AliExpress so maybe it has also problems to deliver the expected current) I ordered a 12Vdc 3A to check it out.
Anyone else can hear a sort of noise from the camera when it's idle?
nayr
IPCT Contributor
depending on where you park it you may hear the motor whine, it usually fades out or goes away if you move it slightly..
So is Amcrest, (same co. as Foscam now I believe?) doing a knockoff of the 29204?
I'd call it a "Cheap knockoff", but theirs actually costs quite a bit more than the 29204 from AliXpress!
Their "Tech Specs" section is very sparse so no way to really compare full specs.
Just because it looks like a Dahua on the outside, what are the chances it is the same Dahua just rebranded?
Or do all these Chinese factories buy the same shells and stick whatever custom guts into them they please?
Amcrest ProHD Indoor 2 Megapixel Wi-Fi PTZ Dome IP Security Camera- 4x Optical Zoom , Wide 116° Viewing Angle, 2MP (1920TVL), IP2M-846 Black
I'd call it a "Cheap knockoff", but theirs actually costs quite a bit more than the 29204 from AliXpress!
Their "Tech Specs" section is very sparse so no way to really compare full specs.
Just because it looks like a Dahua on the outside, what are the chances it is the same Dahua just rebranded?
Or do all these Chinese factories buy the same shells and stick whatever custom guts into them they please?
Amcrest ProHD Indoor 2 Megapixel Wi-Fi PTZ Dome IP Security Camera- 4x Optical Zoom , Wide 116° Viewing Angle, 2MP (1920TVL), IP2M-846 Black
nayr
IPCT Contributor
Dahua manufacturers cameras for AmCrest, pretty much all of em; they rebrand them and resell them under their own label.
Dahua is an OEM, there are many other US Companies selling Dahua's under different names.. Costco does has Dahuas on the shelf, even FLIR/Lorex are really Dahuas.. even the cheap (under $10k) FLIR Thermals are just dahua rebrands.
Amcrest/Lorex/Flir/Swann/EYESUrv and many more are known to rebrand various models if not all of em.
Dahua is an OEM, there are many other US Companies selling Dahua's under different names.. Costco does has Dahuas on the shelf, even FLIR/Lorex are really Dahuas.. even the cheap (under $10k) FLIR Thermals are just dahua rebrands.
Amcrest/Lorex/Flir/Swann/EYESUrv and many more are known to rebrand various models if not all of em.
marigo
Getting the hang of it
I have placed the camera on a flat surface (indoor) so I have to digitaly flip the picture 180 degrees. I have also tried to physical turn the camera with my hands, but I can stil hear some noise. When I set some strength on the camera body the noise is somewhat adjustable.
But in other words this noise I hear is just the type of camera?
But in other words this noise I hear is just the type of camera?