Tinycam Pro, can't connect to NVR but able to connect to stock app

E46M3

n3wb
Joined
Mar 27, 2017
Messages
8
Reaction score
0
as mentioned, I can't connect my Laview NVR to Tinycam. But I have no problem with my laview stock app. In the IP address in Tinycam app, do I enter my public IP address? Which protocol do I use? Thanks!
 

E46M3

n3wb
Joined
Mar 27, 2017
Messages
8
Reaction score
0
make sure you are using proper ports...554 not 8000 (media port is only used by hikvision ivms)
I tried everything. RTSP over TCP, RTSP over UDP, HTTP... to no avail. Not sure if it matters, the actual model of my system is not listed in the Laview section. I just picked a bunch and tried and nothing worked. Please see below, I left my public IP blank for posting purposes.Screenshot_20170328-215624.png
 
Last edited:

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
I tried everything. RTSP over TCP, RTSP over UDP, HTTP... to no avail. Not sure if it matters, the actual model of my system is not listed in the Laview section. I just picked a bunch and tried and nothing worked. Please see below, I left my public IP blank for posting purposes.View attachment 16723
have you confirmed the actually rtsp port? sometimes its 8554 or you may have changed it to something else..
 

E46M3

n3wb
Joined
Mar 27, 2017
Messages
8
Reaction score
0
have you confirmed the actually rtsp port? sometimes its 8554 or you may have changed it to something else..
Yes, there was a discrepancy as when I connected directly to the NVR , the port said 8554, but when logged in from web, it's 554. So I changed everything to 554. But again, no dice...
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
Yes, there was a discrepancy as when I connected directly to the NVR , the port said 8554, but when logged in from web, it's 554. So I changed everything to 554. But again, no dice...
delete the nvr in tinycam and start over...confirm proper port numbers using the fing mobile app or another network scanning tool...
the tinycam developer is a member here and can give you more guidance, but its likely something basic...@alexvas
 

E46M3

n3wb
Joined
Mar 27, 2017
Messages
8
Reaction score
0
delete the nvr in tinycam and start over...confirm proper port numbers using the fing mobile app or another network scanning tool...
the tinycam developer is a member here and can give you more guidance, but its likely something basic...@alexvas
It's definitely talking to the NVR. I hit the reboot button inside the tinycam app and it rebooted the NVR. I just can't get the video feed.
 

tmcata

n3wb
Joined
Mar 25, 2017
Messages
15
Reaction score
2
I have the same issue with a Hikvision DS-7104. Searching with Fing and available ports are 80, 554 and 8000. Tried to configure with any and the result is the same.
Any suggestion is appreciated.

Sent from my SM-G930F using Tapatalk
 
Top