PFB203w

Crazykiller

Getting comfortable
Joined
Jan 30, 2017
Messages
544
Reaction score
317
Location
Germany
You mean inside, aren't you? You could do the connection within the mount. It's not that much space but it fits.
 

Crazykiller

Getting comfortable
Joined
Jan 30, 2017
Messages
544
Reaction score
317
Location
Germany
You don't need a large drill. Just get with your cat. Cable through the wall into the bracket. Get a rj45 crimped on the cable (don't forget the plastic stuff delivered with your cam), plug the jack in the socket and close the waterproof plastic cap. Then mount the bracket to the plate on the wall.
 

Sander kerkhoff

Young grasshopper
Joined
Mar 12, 2017
Messages
91
Reaction score
10
But for that i need the mount i think, the cam itself had not enough space i think for the pigtail and Cat5 cable with connector
 

Crazykiller

Getting comfortable
Joined
Jan 30, 2017
Messages
544
Reaction score
317
Location
Germany
Right, for this you need a bracket. Your question was if you could make the connection fit into the bracket and the answer is yes
 

Jagradang

Getting the hang of it
Joined
Aug 10, 2017
Messages
172
Reaction score
36
do you have to drill a hole through the wall to go into this mount or can you go from the sides. My cable will be running from the roof down the wall to the mount and therefore i want to enter into the mount from the top/bottom or sides?

is this possible?
 

bobsmith

n3wb
Joined
Jul 4, 2017
Messages
21
Reaction score
9
do you have to drill a hole through the wall to go into this mount or can you go from the sides.?
is this possible?
yes maybe a 10mm hole somewhere near the bottom and fish it through? The cavity at the top is large enough for the pigtail. The brackets are very nice. I will be painting one a similar colour to the wall, so it's less obvious.
 

Crazykiller

Getting comfortable
Joined
Jan 30, 2017
Messages
544
Reaction score
317
Location
Germany
do you have to drill a hole through the wall to go into this mount or can you go from the sides. My cable will be running from the roof down the wall to the mount and therefore i want to enter into the mount from the top/bottom or sides?

is this possible?
Yep, there are two holes for cable insertion. One at the bottom and one to the side. The bracket comes with two cable fittings for the holes.
 

Jagradang

Getting the hang of it
Joined
Aug 10, 2017
Messages
172
Reaction score
36
Thank you everyone!!! that's great help. Can order my brackets and my hdw5321r-ze camera now. Super excited to get it all setup and running. Just deciding on NVR vs blue iris now and i'll be done!
 

mat200

IPCT Contributor
Joined
Jan 17, 2017
Messages
13,670
Reaction score
22,782
Great mount, highly recommend it.
 
Top