Hi,
I just wanted to upgrade my brand new Chinese DS-2CD6412FWD-30 (FW 5.1.0) to 5.1.6, when I noticed that there/s no davinci file present.
Or is this file only present in the 5.1.6 update? I just want to make sure everything works beforehand, before I create a Chinese brick after the upgrading.
Also, running the ftpput/get gives me the message 'applet not found'. Using an FTP program to log in to the camera does work (but there's no davinci file to replace).
TFTP doesn't work either. I tried with POE as well as separate 12V, cable direct to pc, cable via switch, but TFTP server doesn't give any messages after rebooting camera. SADP sees the camera perfectly during this process, so it's connected and running. Windows Firewall is off.
Anyone have a clue how to proceed?
Thanks!
DS-2CD6412FWD-30
I just wanted to upgrade my brand new Chinese DS-2CD6412FWD-30 (FW 5.1.0) to 5.1.6, when I noticed that there/s no davinci file present.
Or is this file only present in the 5.1.6 update? I just want to make sure everything works beforehand, before I create a Chinese brick after the upgrading.
Also, running the ftpput/get gives me the message 'applet not found'. Using an FTP program to log in to the camera does work (but there's no davinci file to replace).
TFTP doesn't work either. I tried with POE as well as separate 12V, cable direct to pc, cable via switch, but TFTP server doesn't give any messages after rebooting camera. SADP sees the camera perfectly during this process, so it's connected and running. Windows Firewall is off.
Anyone have a clue how to proceed?
Thanks!
DS-2CD6412FWD-30
Firmware Version | V5.1.0 build 131202 |
Encoding Version | V5.6 build 131127 |
Last edited by a moderator: