Can't Switch Cameras on the UI2 page

Joined
Oct 18, 2017
Messages
15
Reaction score
2
Love the UI2 page over stock.

But I cant seem to figure out how to get all 4 cameras on at the same time (like when I look on the NVR), or even switch between cameras. I can see the clips list on the left, and can access those clips, but when I hit "Go Live", it sends me back to the only camera I can seem to get to load.

All cameras can be viewed on the stock jpegpull.htm page.
 

hltljohn

Getting the hang of it
Joined
Oct 29, 2015
Messages
90
Reaction score
42
In the black menu bar at the top, look for "Current Camera:". Under "Current Camera:" you can select what cameras you are viewing. When you change this it also changes the clips, but if you change what the clips are viewing it does not change Current Camera.
 

bp2008

Staff member
Joined
Mar 10, 2014
Messages
12,666
Reaction score
14,005
Location
USA
The dropdown shows all your group names (plus "All cameras") and is not intended to show every camera because some people have a lot of cameras.

However the video below should certainly contain all your cameras. If it is different from jpegpull in this regard, then something is certainly wrong. Can you create a temporary user account for me in Blue Iris and send connection information to me in a private message ("conversation")? Try the account yourself before you send it to make sure it demonstrates the problem.
 

bp2008

Staff member
Joined
Mar 10, 2014
Messages
12,666
Reaction score
14,005
Location
USA
Aha, this was another occurrence of the "no groups have webcasting enabled" issue. It is a rare configuration and UI2 doesn't handle it well.
 
Top