JPEG SNAPSHOTS

Stanley71

Getting the hang of it
Joined
Aug 26, 2017
Messages
144
Reaction score
17
Location
USA
Below are my settings for JEPEG snapshots. I was trying to setup so only snapshots were taken when the camera was triggered. About 10% of the time this happens but none are taken for short duration triggers. Is there a minimum time a trigger must occur before a snapshot is taken? It appears it should also be taking a snapshot every 10 minutes but it does not. Do I have it setup incorrectly? I really don't want snapshots every ten minutes either.

upload_2017-11-2_15-15-51.png
 

cameraman27

Young grasshopper
Joined
Jan 29, 2016
Messages
64
Reaction score
15
Currently you have it set to take a snapshot every 10 minutes DURING a trigger. So if the trigger is less than 10 minutes, it will not take a snapshot.

if you uncheck 'only when triggered' it will take a snapshot every 10 minutes, forever, regardless of trigger state.
 

Stanley71

Getting the hang of it
Joined
Aug 26, 2017
Messages
144
Reaction score
17
Location
USA
Much appreciated. I was thinking a different way. So from what your saying it will trigger a snapshot immediately but won’t fire again for 10 minutes if it’s still in the original triggered state even thought more triggers have occurred in that 10 minute period? Have I got it?

I do understand it taking snapshots every 10 minutes with other box unchecked.
 

Stanley71

Getting the hang of it
Joined
Aug 26, 2017
Messages
144
Reaction score
17
Location
USA
Thanks srglassw didn’t even think of that; I’ll have to do some research.
 
Top