SmartPSS version with windows 10/64

bug99

Pulling my weight
Joined
Dec 27, 2016
Messages
397
Reaction score
154
I was going to check out Dahua's SmartPSS software, as it is mentioned here a bit. I see that i have two obvious options of versions to chose from. Choosing the "latest" is not so obvious. Thoughts? If i had to take a SWAG, i will probably pick the older 2.00 version.

1. the jan 23 2017 relese of ver 1.16
2. the Nov 25 2016 release of ver 2.00
 

nayr

IPCT Contributor
Joined
Jul 16, 2014
Messages
9,329
Reaction score
5,325
Location
Denver, CO
2.0 got a complete revamp and and new look, I think right now both are receiving maintenance until 2.0 is as feature complete as the previous version..

its common for alot of software to maintain the last 2 major revisions because many companies have policies about major version updates require additional scrutiny and might wait for it to become more mature.. also when you change how things look then users need to be retrained and that takes time.

there are a few things still missing or not quite working right on 2.0, for example 2nd sub-streams are not accessable.. but I been running a really old version of 1.14 on Mac before 2.0 came out and there's alot more that 2.x supports that 1.4 didnt (h265/SmartCodec/IVS)

Run 2.x unless you have a reason to stay on 1.x
 
Last edited:

drewgost

Getting the hang of it
Joined
Oct 6, 2016
Messages
217
Reaction score
25
I am using 2.0 now and it is working awesome at least for what I know, IVS was pretty simple, and getting everything was even easier
 

TVT73

Pulling my weight
Joined
Aug 29, 2016
Messages
406
Reaction score
108
Location
Germany
I also use Version 2.0 on Windows 8.1 64 bit. I like the look, most parts are working (for what i need is only basics and configuring). I don´t use monitor wall or people counting p.e. But i testesd V1.x only a few hours.

These points i found out are not so fine working:
- IVS Roules are every time visible, although i disabled them, but it´s not been saved in the provile
- configuring external p2p devices is extremely slow, mostly i see timeouts (but it´s possible and it´s for a technican a useful tool)
- sometimes i loose connection to sub streams, when doule clicking and single click to close

Why using Smart PSS:
- when using multi monitor setup, it´s the only way to get the full screen on the second monitor (all plugins incl. recorder opens the fullscren view on main monitor, no joke!)
- When starting it restores last view, very nice
- recording playback from every source (NAS, SD, local, NVR)
- using sub stream switches to first stream full screen on double click, nice function

It runs almost stable. Better than my recorder plugin, which crashes often when using playback.
What i miss is complete cam configuring, using it as a video server (like an NVR)
 

nayr

IPCT Contributor
Joined
Jul 16, 2014
Messages
9,329
Reaction score
5,325
Location
Denver, CO
CPU load seems better with 2.0, im sitting @ ~60% of a single cpu (5% system) with 5 substreams and 1 main stream.

If I setup the Safrai browser to the same view with 5 substreams and 1 main stream, the npmedia plugin is using ~100-130% of a single core

If your on a laptop or a battery powered device you'll be very wise to favor SmartPSS over WebUI, it'll give you much better runtime when your not plugged in.. mebe 2x as much runtime.
 

oh6hfx

Getting the hang of it
Joined
Jun 26, 2016
Messages
113
Reaction score
36
Location
Lohtaja, Finland
Now there seems to be again new version of SmartPSS:
SmartPSS_ChnEng_Win32_IS_V2.02.0.R.171124

And no older version available to download on Dahua website.

I had 2.001 170225 installed and updated to version above. I chose English as language but after installation it was Spanish! Could not remember my admin password because earlier version had forced me to
create complicated password in a hurry..

Lucky I had done a backup of my devices just couple of weeks ago, so uninstalled the whole thing and then installed newest version. This time the language was right (english). Imported the devices but the new version was able to connect
only half of them (I have ~50 devices in my list). Also the layout seems lot simpler than 2.00.1 version, also font is bigger. Like Dublo-legos compared to normal :)

Well, I could do what I was intented to. Somehow 2.00.1 crashed when I tried to adjust snapshot frequency of one P2P-connected HFW5231Z camera. 2.02.0 worked fine.

Although I cannot understand why adjusting camera settings is so slow via SmartPSS, shouldn't it exchange just simple numerical information?

Anyway I didn't like the new version so uninstalled and switched back to 2.00.1. After importing the same devices.xml file it could connect all devices.
 

bigredfish

Known around here
Joined
Sep 5, 2016
Messages
17,021
Reaction score
47,489
Location
Floriduh
Why using Smart PSS:
- when using multi monitor setup, it´s the only way to get the full screen on the second monitor (all plugins incl. recorder opens the fullscren view on main monitor, no joke!)
- When starting it restores last view, very nice
- recording playback from every source (NAS, SD, local, NVR)
- using sub stream switches to first stream full screen on double click, nice function



The previous V2.001 did this which was nice, and double clicking again sent it back to sub-stream. Not so with the new 2.02 version unfortunately...:angry:

 

oh6hfx

Getting the hang of it
Joined
Jun 26, 2016
Messages
113
Reaction score
36
Location
Lohtaja, Finland
Bigredfish, oh, also that. Sound not so good. I sell + install Dahua cameras and it is hard to instruct people to install SmartPSS if every 0.1 version is so different. Also now I am a bit worried what happens when they download
newest version and it cannot connect the device anymore.
 

bigredfish

Known around here
Joined
Sep 5, 2016
Messages
17,021
Reaction score
47,489
Location
Floriduh
I reverted back to 2.00.1 and all is fine again.

My own fault, I broke my own rule that says never upgrade any software or firmware until 6 months have passed ;)
 

bigredfish

Known around here
Joined
Sep 5, 2016
Messages
17,021
Reaction score
47,489
Location
Floriduh
Ha! No problem man, gotta take one for the team every now and then :D
 

bigredfish

Known around here
Joined
Sep 5, 2016
Messages
17,021
Reaction score
47,489
Location
Floriduh
I'm only using it as a viewer/monitor not as a VMS so not sure if this is helpful or not, but with 16 cameras being monitored live on substream at about 512kbps each, on my HP laptop Intel Core-i5 5200U 2.2Ghz, 64bit with 6GB of RAM, I'm running 10% CPU.

When I crank them all up to main stream, 2MP at 6144 bitrate and 30FPS, it spikes to 75% CPU

Its handy as I can monitor all cams from 3 different NVR's easily
 

mmdb

Getting the hang of it
Joined
Dec 18, 2016
Messages
242
Reaction score
52
Location
Croatia
i just install smartpss and when wanted to start program it keep saying that i need to check admin password ive tried admin admin ,what is the password
 

Myllerman

Getting the hang of it
Joined
Apr 16, 2016
Messages
143
Reaction score
24
i just install smartpss and when wanted to start program it keep saying that i need to check admin password ive tried admin admin ,what is the password
Strange, when i installed it i got to choose the password. SmartNVR is admin/admin until you change it i think. SmartPSS asked for new pass, atleast for me but might differ version to version. One solution is to reinstall..
 

mmdb

Getting the hang of it
Joined
Dec 18, 2016
Messages
242
Reaction score
52
Location
Croatia
thx myllerman i will try to delete it and reinstall it again .im 130km from home and would like to do it today
 

bigredfish

Known around here
Joined
Sep 5, 2016
Messages
17,021
Reaction score
47,489
Location
Floriduh
It asked me for the old install password when I upgraded to the new version (which sucks IMHO) and thankfully Mrs bigredfish had written it down :)
 

mmdb

Getting the hang of it
Joined
Dec 18, 2016
Messages
242
Reaction score
52
Location
Croatia
i reinstal to 1.6 version i think all good now passw ..admin admin ..bu when i follow instruction on dahua wiki page for ivs there is no ivs config ? on this versionIMG_20180117_152754.jpg
 
Top