ANNKE I61DR 2MP (Hikvision Cube Clone)

fenderman · Mar 18, 2018

skjom said:
Tried with simpler pass with same issue repeating.

Thanks was worth a shot anyway.

Sent from my XT1635-02 using Tapatalk

step away from tiny cam so you can determine what the issue is...
reset, change the ip and and use the browser...you likely wont have any problems loggin in...this is 100 percent user error...

skjom · Mar 18, 2018

fenderman said:
step away from tiny cam so you can determine what the issue is...
reset, change the ip and and use the browser...you likely wont have any problems loggin in...this is 100 percent user error...

Have reset the password 3 times and device.
Changed the IP twice and set up alternative user password.
The browser works fine - I established that earlier this morning and know it works.

What I want is to use the Camera with an App which doesn't work.

Create a SPAN port on Lan with layer 3 switch to see what traffic was hitting camera to see was another device in house trying to access and lock it out with nothing happening. Could not see where issue was occurring

Don't know what these apps do under hood any how they are authenticating so now am at loss.

Sent from my XT1635-02 using Tapatalk

alastairstevenson · Mar 18, 2018

skjom said:
Gave up , done everything I could think of with this camera.
Factory reset camera. Tried debugging with Wireshark.
Camera will only authenticate via web.
TinyCam or other apps won't work and authenticate.

What does VLC make of connecting to the RTSP stream? Or ONVIF Device Manager?

skjom · Mar 18, 2018

alastairstevenson said:
What does VLC make of connecting to the RTSP stream? Or ONVIF Device Manager?

ONVIF manger works fine. So it does pull the RTSP stream. Is it therefore an issue accessing specific protocols

Sent from my XT1635-02 using Tapatalk

LBJ · Mar 18, 2018

if you can do it in the next 10 minutes, there is an Amazon lightning deal on these. $44

Mike A. · Mar 18, 2018

skjom said:
ONVIF manger works fine. So it does pull the RTSP stream. Is it therefore an issue accessing specific protocols

Sent from my XT1635-02 using Tapatalk

In the set up for the cam...

Configuration - Security - Authentication

Check how that's set for RTSP authentication.

Under Security - Security Service might also disable Enable Illegal Login Lock.

Also that there aren't any filter restrictions.

robertsig · Mar 18, 2018

I have the same issue with all iPhone IP camera apps that I've tried, but I have the same issue with my Dahua's too. Blue Iris works fine.

skjom · Mar 19, 2018

robertsig said:
I have the same issue with all iPhone IP camera apps that I've tried, but I have the same issue with my Dahua's too. Blue Iris works fine.

Really strange stuff. The live display worked using ONVIFER app which then somehow kick-started all the other apps and now they are displaying live video over any protocol I selected.
I switched back off upnp, disbaled hik platform service. Switched off all internet access and then switched on WiFi .

Working over WIFi as well now.

2 strange observations:
1./
ONVIFER app somehow kick started the thing and then Tiny cam worked.
This repeated on other devices.
I.e went to other device (Amazon fire)would not work in TinyCam then installed ONVIFER and low and behold it then suddenly popped up the live feed also in TINYCAM.

2./
Something very strange on the network adapters.
I had the lan set to IP .140 , had the WLAN set to .146. Disconnected the cable and rebooted.
I was able to login to the camera over the wireless network using .140 and display feeds using .140 with no cable connected.
When doing a search for cams on network I was returning .146. but I could not connect via .146.
I set both IPs to .140 and it's working now.
How do the adpaters work in this camera are they bridged or something.

Don't know what happened but it's working .

Sent from my XT1635-02 using Tapatalk

Steve-S63 · Mar 25, 2018

I just bought one of these and can get it to work on my phone with the Annke software. I can not get it to work in BI though. The iVMS-4200 shows it but says it's not on the net. I can get to the log in screen via a web browser but the password that I use via the Annke software does not work. I have no idea what I'm doing wrong.

giomania · Mar 26, 2018

Maybe look up some YouTube videos using IVMS – 4200, because when I used it you have to click on the camera and initiate it or something to that effect.

Sent from my iPhone using Tapatalk Pro

fenderman · Mar 26, 2018

Steve-S63 said:
I just bought one of these and can get it to work on my phone with the Annke software. I can not get it to work in BI though. The iVMS-4200 shows it but says it's not on the net. I can get to the log in screen via a web browser but the password that I use via the Annke software does not work. I have no idea what I'm doing wrong.

Post your settings

jazzy1 · Mar 26, 2018

do you guys think this cam is better than the Amcrest Shield 2k??

ndstate · Mar 29, 2018

In Blue Iris are you guys just using the generic make or one of the hikvision settings? Thanks

ndstate · Mar 29, 2018

elitef said:
has anyone else noticed that the live view of this cam pulsates every second? or is it just me?

I had the same issue.

TheDank said:
I notice that also. I believe it has something to do with the H.264 encoding. It seems to pulse on the I-frames. I get the pulse every 2 seconds, I have mine set to:
Frame Rate: 10
I Frame Interval: 20
Max Bitrate: 4096
I haven't investigated it much, so far I've just said, "Huh. That's annoying."

This seems to have made it better. Frame rate of 15 and I Frame of 30 also seems ok. Thanks

skywaytp · Mar 30, 2018

giomania said:
Maybe look up some YouTube videos using IVMS – 4200, because when I used it you have to click on the camera and initiate it or something to that effect.

Sent from my iPhone using Tapatalk Pro

Hi giomania,
Do you (or anyone) know how to set this cam on continuous recording when it stands alone without NVR? I could not find such option in setting.
I bought 02 and will have them placed at my aged parents' home while I'm not around regularly to format the microSD cards when they are full.

fenderman · Mar 30, 2018

skywaytp said:
Hi giomania,
Do you (or anyone) know how to set this cam on continuous recording when it stands alone without NVR? I could not find such option in setting.
I bought 02 and will have them placed at my aged parents' home while I'm not around regularly to format the microSD cards when they are full.

You never have to format when full...set it to overwrite

skywaytp · Mar 30, 2018

fenderman said:
You never have to format when full...set it to overwrite

Thank you fenderman, but under Configuration -> Storage, I could not find any option to set it to overwrite.

fenderman · Mar 30, 2018

skywaytp said:
Thank you fenderman, but under Configuration -> Storage, I could not find any option to set it to overwrite.

Does the camera auto-delete old files?

skywaytp · Mar 31, 2018

fenderman said:
Does the camera auto-delete old files?

Thanks fenderman!

danbutter · Mar 31, 2018

ndstate said:
In Blue Iris are you guys just using the generic make or one of the hikvision settings? Thanks

I did the inspect for mine and it works.
In BI go into the cam properties and then hit the video tab then configure button. In the new window hit the Find/inspect button and use what it finds.

Hope that helps.

Search

ANNKE I61DR 2MP (Hikvision Cube Clone)

fenderman

skjom

Young grasshopper

alastairstevenson

skjom

Young grasshopper

LBJ

n3wb

Mike A.

Known around here

robertsig

Young grasshopper

skjom

Young grasshopper

Steve-S63

n3wb

giomania

fenderman

jazzy1

Getting the hang of it

ndstate

Young grasshopper

ndstate

Young grasshopper

skywaytp

Young grasshopper

fenderman

skywaytp

Young grasshopper

fenderman

skywaytp

Young grasshopper

danbutter

Getting the hang of it