I have a couple of the IPC-HDBW4231F-AS Wedge Dome's inside my home. On is really slow to change back from night mode to color. Both cameras are setup the same, any recommendations on what settings I need to adjust to keep the in day mode longer and get it to swap back to color quicker once room lights are turned back on?
Day/Night Settings
- Thread starter upstech76
- Start date
Q™
IPCT Contributor
Same firmware on both cameras?
Q™
IPCT Contributor
I believe there is a setting in the firmware which controls that speed?
bigredfish
Known around here
That and maybe the two locations simply have slightly different natural light?
It could be an issue of natural light but it seems to take a long time once I turn the light on in my home office before it swaps back to color. I've played around with the settings but really haven't been able to improve it.
looney2ns
IPCT Contributor
Settings>Camera>Conditions>Day&night.
The cams on the north side of my house change 10-20 minutes earlier than the same cams on the south side at sunset.
All same settings and firmware.
The cams on the north side of my house change 10-20 minutes earlier than the same cams on the south side at sunset.
All same settings and firmware.