are you sure yours was bricked??? use ivms-4200 or web GUI to log in and then hit reboot. don't use the app to try to log in. after rebooting using ivms4200 or web gui, use phone app to add it manually using serial number and verification code. i always do it like that without any problem
Sweet! LTS is releasing an ONVIF compatible doorbell with SD card slot and 940nm IR
- Thread starter hook3m
- Start date
drachen
n3wb
- Joined
- Apr 23, 2018
- Messages
- 11
- Reaction score
- 24
Confirmed! The IR lights are off and the picture quality is great. We have an overhead light above our door that provides all the illumination we need.
So in summary:
1) Remove the 4 screws to release the back cover. There will be a piece of heat sink compound that may detach itself. Be sure to save this and place it back over the two chips it came from when re-assembling.
2) Remove the three Philip's screws and detach the connectors connecting the main board to the housing.
3) Disconnect J14 and J15 as noted in the picture above
4) While you are here, take the time to clean the camera lens and inner dome lens. As others have noted, it makes a difference.
5) Reassemble and enjoy IR free performance!
So in summary:
1) Remove the 4 screws to release the back cover. There will be a piece of heat sink compound that may detach itself. Be sure to save this and place it back over the two chips it came from when re-assembling.
2) Remove the three Philip's screws and detach the connectors connecting the main board to the housing.
3) Disconnect J14 and J15 as noted in the picture above
4) While you are here, take the time to clean the camera lens and inner dome lens. As others have noted, it makes a difference.
5) Reassemble and enjoy IR free performance!
Attachments
Yes, it was bricked. No lights whatsoever after it got to 80% upgrade bar and rebooted. Couldn't ping it, couldn't get to web GUI even after holding reset button for a minute.
Great job on the manual option to disable IR illumination glare and probably save on power consumption within doorbell unit as well.
Johnny Trendy
n3wb
- Joined
- Jan 27, 2018
- Messages
- 6
- Reaction score
- 1
My RCA was constantly going offline so I did a reset. With the updated RCA app it doesn't let me configure the device password so I cannot reconnect it to my NVR. Is there a default password? Also in the RCA app under LAN live view the verification password from the device sticker does not work.
breakfast247
n3wb
Try one of the other apps, like from LaView or HikVision. I know for a fact that the LaView app prompts for a device password after resetting and adding the doorbell - I just did it the other day.
Bitslizer
Pulling my weight
- Joined
- Nov 23, 2017
- Messages
- 467
- Reaction score
- 193
Find the verification code under the face plate (beneath the dome lens to the left of the QR code)
user name: admin
password: adminVERIFICATIONCODE
Johnny Trendy
n3wb
- Joined
- Jan 27, 2018
- Messages
- 6
- Reaction score
- 1
THANKS! It worked.
drachen
n3wb
- Joined
- Apr 23, 2018
- Messages
- 11
- Reaction score
- 24
So I was doing some thinking regarding questions several folks have asked regarding intercepting the doorbell button being pressed so something else can be triggered and I have a theory that it might be possible to do this. Given that all communication regarding the doorbell button is done via IP network protocols, it should be possible to identify packets being sent to the "cloud" service that normally sends doorbell presses to the mobile apps. If the doorbell press traffic is HTTPS encrypted (likely, but need to confirm this), it might be more complicated but there may be identifiable traits that would not require reading of the actual packet data, just the basic properties.
I am going to do some research this weekend if I have time with Wireshark to try and figure out how to uniquely identify the packets from the doorbell containing button presses. The theory is that this packet can be listened for using a small application resident on another device on the local network that can then trigger something else (Smart Hub such as Smartthings, etc) as opposed to having to rely on a separate app and a backend cloud service in China or otherwise (something I've never been totally comfortable with).
I am going to do some research this weekend if I have time with Wireshark to try and figure out how to uniquely identify the packets from the doorbell containing button presses. The theory is that this packet can be listened for using a small application resident on another device on the local network that can then trigger something else (Smart Hub such as Smartthings, etc) as opposed to having to rely on a separate app and a backend cloud service in China or otherwise (something I've never been totally comfortable with).
Last edited:
Shyam
Young grasshopper
- Joined
- Feb 8, 2018
- Messages
- 52
- Reaction score
- 2
I like your thinking! Looking forward to the results of your test!
Which app are you using in the screenshot? It doesn't look like my HIK-Connect version?
drachen
n3wb
- Joined
- Apr 23, 2018
- Messages
- 11
- Reaction score
- 24
It's the latest revision of the RCA Security branded app.
The wifi doorbell is running very stable for me, I have it for about 2 months now. I just wonder a few things to which I have not found an answer to (yet)..
- How can I check the storage of the SD card in the doorbell?
- Can I reach the storage over SMB or FTP?
- The HIK-Connect app can hold 99 motion messages, If I delete such message via the app, is the video gone from the SD card?
- When the storage is full, will the HIK-Connect app automatically erase the oldest videos?
- How can I check the storage of the SD card in the doorbell?
- Can I reach the storage over SMB or FTP?
- The HIK-Connect app can hold 99 motion messages, If I delete such message via the app, is the video gone from the SD card?
- When the storage is full, will the HIK-Connect app automatically erase the oldest videos?
theredmoose
n3wb
- Joined
- Sep 28, 2015
- Messages
- 25
- Reaction score
- 1
Is this uniden the same as the LTS and other ones talked about here:
https://www.amazon.com/gp/product/B075V9ZKTY/ref=ox_sc_act_title_2?smid=ATVPDKIKX0DER&psc=1
https://www.amazon.com/gp/product/B075V9ZKTY/ref=ox_sc_act_title_2?smid=ATVPDKIKX0DER&psc=1
As an Amazon Associate IPCamTalk earns from qualifying purchases.
Bitslizer
Pulling my weight
- Joined
- Nov 23, 2017
- Messages
- 467
- Reaction score
- 193
1) with the app to check status, but not browse the folder. you can access video via playback mode
2) no, the doorbell can upload JPG to a ftp server, but not videos
3) no clue
4) yes, auto overwrite oldest
Yes
As an Amazon Associate IPCamTalk earns from qualifying purchases.
I just picked up the RCA flavor of this doorbell (I prefer the lack of logo on the faceplate).. set it up and upgraded the firmware to 180515. I was frustrated with the inconsistent delays with my Nest Hello so I decided to give this a try.. Very impressed so far - been testing it all day now with no delays for notifications, doorbell presses result in an immediate push notification to my iPhone.. the audio and video quality aren't quite what the Nest Hello provided, but that's an OK trade-off in my book.
What's the consensus for a client app to use with this? I did add it to my Blue Iris setup (I have 11 other IP cameras around the property), but in terms of getting a notification on the doorbell button press to initiate a conversation, which client app is the best overall? RCA Security, Hik-Connect, LaView, etc?
Thanks!
What's the consensus for a client app to use with this? I did add it to my Blue Iris setup (I have 11 other IP cameras around the property), but in terms of getting a notification on the doorbell button press to initiate a conversation, which client app is the best overall? RCA Security, Hik-Connect, LaView, etc?
Thanks!
I just received my doorbell today. It's up, and running with the RCA software. It works pretty well. However, I cannot for the life of me figure out how to get it into BI with the rest of my cameras. BI finds the camera, but that's about where it ends. What am I missing?
i've used all of them before and still have all of them on various phones. RCA app got redesigned GUI and seemed stable. but internally they are all the same, probably because hikvision also sold the source code to them. all of them have two bugs so far in iOS: notification number at the corner of app shortcut keeps counting up without being reset, and 2nd bug is the replay in landscape view cannot be exited if the replay video has finished - has to restart the replay to turn back to normal view. I didn't see these two bugs in android version.
hikvision app has about two to three more new features than the rest of apps because hikvision updates their app quite often.
i read someone posted info on this thread long time ago, If you want to add it to something like Blue Iris then you need to use the following address: rtsp://ipaddress/mpeg4/ch01/main/av_stream
did you purchase blue iris? from blue iris website it seems it's only free for certain functionalities. it is not free however if you want to record video to hard disk or drive. is it so? i am trying to get a software to do it.