Menu
What's new

HikVision Password Reset / Flash new FW via RS232

marku2

marku2

Known around here
Joined
Dec 23, 2016
Messages
919
Reaction score
263
Location
Australia
admin
adminQGFYCU
Then hit add camera in iVMS in the computer
The firm ware is 5.5.4 for this camera on the Europe web site under the consumer camera section
 
deanfourie

deanfourie

n3wb
Joined
Jul 21, 2018
Messages
21
Reaction score
3
Location
New Zealand
Update only gets as far as file transfer complete. I am not receiving the update process complete or whatever it is message. That's what makes me think maybe it wrong firmware.

If I try it in SADP I get device rejected, if I try it in ivms I get incorrect password.
 
marku2

marku2

Known around here
Joined
Dec 23, 2016
Messages
919
Reaction score
263
Location
Australia
deanfourie said:
Update only gets as far as file transfer complete. I am not receiving the update process complete or whatever it is message. That's what makes me think maybe it wrong firmware.

If I try it in SADP I get device rejected, if I try it in ivms I get incorrect password.
Click to expand...
Can you hit the rest button and see what it goes back to
 
v-milenin

v-milenin

Young grasshopper
Joined
Nov 18, 2018
Messages
34
Reaction score
5
Location
russia
Maybe the file, that you are sending to camera is bigger than 32mb, if so, you shoud use 64bit TFTP version.
Some time ago i used usb-uart to firmware the cam, and it was pretty easy. The cam accepts any kind of firmware, but it can't boot properly with wrong firmware.
Also with usb-uart you can see all mesages during upgrade process on the screen.
Also using usb-uart you can change the default TFTP address in camera to make the upgrade process more convinient.
 
You must log in or register to reply here.
Top