Latest New 20180813 Firmware for DH_IPC-HX5X3X-Rhea

jrf

Getting the hang of it
Joined
Sep 12, 2017
Messages
169
Reaction score
93
Is this firmware ok to use on IPC-HFW4239T-ASE as stated in first post as the filename in the firmwares start 5x3x and not 4x3x ?
I can confirm this worked on my IPC-HFW4239T-ASE
 

Bubs

Getting comfortable
Joined
Dec 26, 2016
Messages
84
Reaction score
21
Ok is there a consensus which in currently best and most stable for use on the IPC-HDW5231R-ZE

Thanks in advance
 

PancakeBimmer

Young grasshopper
Joined
Jun 9, 2015
Messages
64
Reaction score
7
Is there a reason why with this firmware camera is constantly trying to get to 54.241.203.224 which is assigned/owned to Amazon?
This did not occur with 2017 firmware that camera came with, regardless, I am still blocking it from any internet access and just curious about 54.241.203.224

Edit:
All cloud and P2P is disabled. Yes, double checked after firmware upgrade.
 
Last edited:
Joined
Feb 17, 2018
Messages
25
Reaction score
11
Is there a reason why with this firmware camera is constantly trying to get to 54.241.203.224 which is assigned/owned to Amazon?
This did not occur with 2017 firmware that camera came with, regardless, I am still blocking it from any internet access and just curious about 54.241.203.224

Edit:
All cloud and P2P is disabled. Yes, double checked after firmware upgrade.

I reported this a few months ago, but no one was able to shed any further light on it.

I would love to know what it is:

IPC-HDW5231R-ZE trying to contact Amazon IP

(My cameras are/were running 2.622.0000000.18.R,2017-11-10)
 

fastsvo

Young grasshopper
Joined
Sep 20, 2017
Messages
56
Reaction score
2
After reading this thread entirely, it seems I should hold off upgrading to the current firmware?

I am currently running 2.622.0000000.18.R, Build Date: 2017-11-10

When looking for the "P2P" option all I could find was Network>TCP/IP> "Easy4ip" folder...is this it?
 

EMPIRETECANDY

IPCT Vendor
Joined
Nov 8, 2016
Messages
8,262
Reaction score
23,723
Location
HONGKONG
After reading this thread entirely, it seems I should hold off upgrading to the current firmware?

I am currently running 2.622.0000000.18.R, Build Date: 2017-11-10

When looking for the "P2P" option all I could find was Network>TCP/IP> "Easy4ip" folder...is this it?
There has many new firmware after 2017-10 you can check on the forum too.
 

aristobrat

IPCT Contributor
Joined
Dec 5, 2016
Messages
2,982
Reaction score
3,180
I understand, but due to stability is it worth performing upgrade?
You can go either way, ... imo there's no right/wrong answer. Some folks don't upgrade unless there's a new feature (or bug fix) that they're looking for. Some folks upgrade immediately because they like running the latest version.
 

aDEO

n3wb
Joined
Nov 21, 2018
Messages
18
Reaction score
1
Location
EU
Hello guys,

|s this firmware compatible with IPC-HDW4431EM-ASE cameras? I can't find anything related to 4431 and the last official firmware is from 2017.

Thank you in advance.
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
Thank you, Andy!

However, the content of IVS tab is not visible with this 31R firmware even after resetting the camera to factory defaults. Any ideas?

Many thanks.
Disable smart codec
 

aDEO

n3wb
Joined
Nov 21, 2018
Messages
18
Reaction score
1
Location
EU
Disable smart codec
Thanks for the suggestion, fenderman. The smart codec is disabled and it seems this issue is with Chrome only (even after clean cache) as I can see the content of IVS tab in IE... Anyway, I'm going to stick with the most up to date firmware for now.
 

myipcam

Getting the hang of it
Joined
Dec 23, 2018
Messages
132
Reaction score
33
Location
USA
NTSC (DH_IPC-HX5X3X-Rhea_Eng_N_Stream3_V2.622.0000000.31.R.180813) version on IPC-HDW5231R-ZE, did anyone notice that "Clear Log" button is missing under Information > Log after selecting a time frame... Or, is it just me?

...on Pale Moon browser
 

jazzy1

Getting the hang of it
Joined
Mar 23, 2015
Messages
300
Reaction score
38
I've noticed my SD card has disappeared from my 5231 cams.....currently on :
IPC-HDW5231R-Z
System Version2.640.0000002.0.R, Build Date: 2018-05-23

Anyone experienced this? is it the firmware? should i revert to an earlier one or upgrade to newer? or try restore to defaults or something?
The 2 cams this has happened on also are constantly losing connection too..ie "no signal" Error 8000274d (refused; check ip)

Thanks!
 
Top