Hi All, I've got the following setup:
Intel NUC
i7-6770HQ running Win Server 2012 R2
Optimal drivers installed correctly AFAIK (see dxdiag details below)
SSD across the board
16 GB RAM
Hik Cams -- 4 x 2.1MP (16fps, 6, 8, 8), 1x3.1MP (10fps), 1x4.1MP (10fps)
BI runs in console (not as service) with local video paused
BI Status shows a steady 2,120 kB/s; 150MP/s
BI server is dual-homed -- Hiks and "cam NIC" run on a dedicated VLAN; management, access, etc on other NIC/VLAN
CPU 55-60% during "idle", higher if a viewer is connected, or if motion/video is going
After looking at the perf database (and keeping in mind I'm not a CPU/PC perf expert), it seems like something is off. I'd like to add more cameras and upgrade existing ones, but this pushes things into the red zone.
What am I misisng? Any advice or recommendations appreciated!
Video Encoders:
Intel® Quick Sync Video H.264 Encoder MFT, {4BE8D3C0-0515-4A37-AD55-E4BAE19AF471}, 0x4, 7, mfx_mft_h264ve_64.dll, 7.17.0002.0021
Intel® Hardware H265 Encoder MFT, {BC10864D-2B34-408F-912A-102B1B867B6C}, 0x4, 7, mfx_mft_h265ve_64.dll, 7.17.0002.0021
H264 Encoder MFT, {6CA50344-051A-4DED-9779-A43305165E35}, 0x1, mfh264enc.dll, 6.03.9600.17415
WMVideo8 Encoder MFT, CLSID_CWMVXEncMediaObject, 0x1, wmvxencd.dll, 6.03.9600.18154
WMVideo9 Encoder MFT, CLSID_CWMV9EncMediaObject, 0x1, wmvencod.dll, 6.03.9600.18154
Intel NUC
i7-6770HQ running Win Server 2012 R2
Optimal drivers installed correctly AFAIK (see dxdiag details below)
SSD across the board
16 GB RAM
Hik Cams -- 4 x 2.1MP (16fps, 6, 8, 8), 1x3.1MP (10fps), 1x4.1MP (10fps)
BI runs in console (not as service) with local video paused
BI Status shows a steady 2,120 kB/s; 150MP/s
BI server is dual-homed -- Hiks and "cam NIC" run on a dedicated VLAN; management, access, etc on other NIC/VLAN
CPU 55-60% during "idle", higher if a viewer is connected, or if motion/video is going
After looking at the perf database (and keeping in mind I'm not a CPU/PC perf expert), it seems like something is off. I'd like to add more cameras and upgrade existing ones, but this pushes things into the red zone.
What am I misisng? Any advice or recommendations appreciated!
Video Encoders:
Intel® Quick Sync Video H.264 Encoder MFT, {4BE8D3C0-0515-4A37-AD55-E4BAE19AF471}, 0x4, 7, mfx_mft_h264ve_64.dll, 7.17.0002.0021
Intel® Hardware H265 Encoder MFT, {BC10864D-2B34-408F-912A-102B1B867B6C}, 0x4, 7, mfx_mft_h265ve_64.dll, 7.17.0002.0021
H264 Encoder MFT, {6CA50344-051A-4DED-9779-A43305165E35}, 0x1, mfh264enc.dll, 6.03.9600.17415
WMVideo8 Encoder MFT, CLSID_CWMVXEncMediaObject, 0x1, wmvxencd.dll, 6.03.9600.18154
WMVideo9 Encoder MFT, CLSID_CWMV9EncMediaObject, 0x1, wmvencod.dll, 6.03.9600.18154