VTO2000A new V4 firmware

Rubeast

n3wb
Joined
Apr 15, 2018
Messages
13
Reaction score
0
If you press the "burglar" switch on the back of the VTO 5 times you'll hear (aside from the siren) a distinct double beep. When you hear this, you can disconnect your VTO and power it back on. Password is reset to the default admin.

Hope this helps!
CC
Thanks for the reply. But I didn't mean how to reset my password.
I mean where can I type my password in the update application "VDPConfig" ?
I receive the same error message as dana2: "Config result: Login over time"
 

misterspip

n3wb
Joined
Feb 26, 2019
Messages
11
Reaction score
1
Location
La Bruyère
Hello

I just upgraded my VTO2000a / VTH1560 / VTH1550CH with the below firmware kindly provided by fa355115
- VTH151X_EngItlFrnGerDutSpnPrt_V4.000.100B000.0.T.20180906
- VTOXXX_EngItlFrnGerDutSpnPrt_P_16M_V3.120.001P000.0.T.20181025

But now the VTH don't connect to the VTO anymore, while if I add the VTO as an IPC in the VTH I can get the video.

Could someone help me reconfiguring it ?

Btw, I also noticed that on the VTH there's no "project" settings anymore.

Best regards,
Fred.
 

catcamstar

Known around here
Joined
Jan 28, 2018
Messages
1,659
Reaction score
1,193
Hello

I just upgraded my VTO2000a / VTH1560 / VTH1550CH with the below firmware kindly provided by fa355115
- VTH151X_EngItlFrnGerDutSpnPrt_V4.000.100B000.0.T.20180906
- VTOXXX_EngItlFrnGerDutSpnPrt_P_16M_V3.120.001P000.0.T.20181025

But now the VTH don't connect to the VTO anymore, while if I add the VTO as an IPC in the VTH I can get the video.

Could someone help me reconfiguring it ?

Btw, I also noticed that on the VTH there's no "project" settings anymore.

Best regards,
Fred.
Hi!

My advice: reset all to factory default. Then configure your VTO first (can be done through VDP config to set/change IP), then by the webservice. Once the VTO is online, plugin the VTH, set IP configuration and let it discover the VTO. That gave (at least with me) the best chance for success.

Bonne chance!
CC
PS. "project setting" menu is hidden: press the "setting" button for 5 more seconds on the VTH, then it'll ask for the "project" settings.
 

misterspip

n3wb
Joined
Feb 26, 2019
Messages
11
Reaction score
1
Location
La Bruyère
Hello,

After reseting everything to factory default (looks like we had the same idea), the VTHs can see the VTO and are ringing when VTO button is pressed but I only get audio. When using monitor I can see the video, it's only not shown for incoming calls.

Any idea ?
 

catcamstar

Known around here
Joined
Jan 28, 2018
Messages
1,659
Reaction score
1,193
Hello,

After reseting everything to factory default (looks like we had the same idea), the VTHs can see the VTO and are ringing when VTO button is pressed but I only get audio. When using monitor I can see the video, it's only not shown for incoming calls.

Any idea ?
Yes, I remember that someone in my review post ([Review] VTO2000A & VTH1550CH & VTNS1060A Intercom Kit) had the same. Go the the webservices page on the VTO and switch the "group call" option.

Hope this helps!
CC
 

misterspip

n3wb
Joined
Feb 26, 2019
Messages
11
Reaction score
1
Location
La Bruyère
Hello
Unchecking the group call option (and restarting VTO/VTH doesn't solve the issue. The VTH don't see the VTO anymore. Moreover, in that case the 2 VTH wouldn't ring when someone presses the VTO button.

With the group call option checked, I get the audio only on both VTH + Audio/video on iDMSS Plus.
Is there something special to be done on VTH/VTO ?

Best regards
 

vol85

n3wb
Joined
Feb 27, 2019
Messages
4
Reaction score
0
Location
italy
Hello

I just upgraded my VTO2000a / VTH1560 / VTH1550CH with the below firmware kindly provided by fa355115
- VTH151X_EngItlFrnGerDutSpnPrt_V4.000.100B000.0.T.20180906
- VTOXXX_EngItlFrnGerDutSpnPrt_P_16M_V3.120.001P000.0.T.20181025

But now the VTH don't connect to the VTO anymore, while if I add the VTO as an IPC in the VTH I can get the video.

Could someone help me reconfiguring it ?

Btw, I also noticed that on the VTH there's no "project" settings anymore.

Best regards,
Fred.
Hello Fred,

can I ask you to share with us the firmware or where we can find it?

Thank you!

Stefano
 

riogrande75

Pulling my weight
Joined
Oct 19, 2017
Messages
390
Reaction score
140
Location
AUSTRIA
THIS IS NOT V4 FIRMWARE RELATED!!!
Pls. SEARCH/READ this forum regarding beginner/newbie questions and stop flooding this thread!
 

Miniot

n3wb
Joined
Apr 2, 2019
Messages
8
Reaction score
0
Location
España
[QUOTE = "misterspip, post: 341512, miembro: 71802"] Hola

Acabo de actualizar mi VTO2000a / VTH1560 / VTH1550CH con el siguiente firmware proporcionado amablemente por fa355115
- VTH151X_EngItlFrnGerDutSpnPrt_V4.000.100B000.0.T.20180906
- VTOXXX_EngItlFrnGerDutSpnPrt_P_16M_V3.120.001P000.0.T.20181025

Pero ahora el VTH ya no se conecta al VTO, mientras que si agrego el VTO como un IPC en el VTH puedo obtener el video.

¿Podría alguien ayudarme a reconfigurarlo?

Por cierto, también noté que en el VTH ya no hay configuraciones de "proyecto".

Atentamente,
Fred. [/ CITA]

Yo lo he solucionado entrando en config del vth presionando los 5 segundos/config vto/ desactivarlo/ poner la contraseña del vto/activar el vto para que se quede guardada la contraseña y ya me ha funcionado el video del vth y el abrir la puerta que me ponia error lock1.
 

Miniot

n3wb
Joined
Apr 2, 2019
Messages
8
Reaction score
0
Location
España
I have solved it by entering the configuration by pressing 5 seconds / config vto / DEACTIVATE / put the password of the vto / ACTIVATE the vto so that the password is saved and the video of the vth has worked and the door that made me error lock1 .
 

Swiffer98

n3wb
Joined
Apr 22, 2019
Messages
5
Reaction score
0
Location
Netherlands
And there is again a never v4 firmware: Share-Online - dl/4NKNMEJP0N52
All I found so far is the new security menu and the missing support for asterisk sip server.
View attachment 36058 View attachment 36059
I upgraded from General_VTOXXX_Eng_P_16M_V3.120.0000.0.R.20180613 to the one above with VDPconfig, upgrade went well, but i cant access the web service anymore, the alarm sound will start after it shows up in the VDPconfig tool, does anyone else has the same issue? And how to fix it? Thanks!
 
Last edited:

Swiffer98

n3wb
Joined
Apr 22, 2019
Messages
5
Reaction score
0
Location
Netherlands
I upgraded from General_VTOXXX_Eng_P_16M_V3.120.0000.0.R.20180613 to the one above with VDPconfig, upgrade went well, but i cant access the web service anymore, the alarm sound will start after it shows up in the VDPconfig tool, does anyone else has the same issue? And how to fix it? Thanks!
Solved! the alarm wil sound if the anit-tamper button state is changed with the (older) stock firmware, but with the new firmware, it will sound if the button is out/off, which it was, since it is on my desk.
So if other people af the same problem, tape the button ;)
 

Swiffer98

n3wb
Joined
Apr 22, 2019
Messages
5
Reaction score
0
Location
Netherlands
Has anyone already had any luck with the SIP functions? I only want to use my (Android) mobile phone and the VTO, i tried the onboard SIPserver, no luck, i do want to try a local SIP server, but i saw in an other post that Asterisk is not supported anymore, which SIP server should i use? Since i have no experince with SIP servers.
 

Swiffer98

n3wb
Joined
Apr 22, 2019
Messages
5
Reaction score
0
Location
Netherlands
I got the build in SIP-server working, with groupcall, but only on my local network.. I forwarded all the ports from the upnp, since those failed. I can connect with the gDMSS app over port 37777 when i am on 4G.
But i get an 502 code when i try any softphone app. Does someone know what i could be doing wrong?

Thanks!
 

catcamstar

Known around here
Joined
Jan 28, 2018
Messages
1,659
Reaction score
1,193
I got the build in SIP-server working, with groupcall, but only on my local network.. I forwarded all the ports from the upnp, since those failed. I can connect with the gDMSS app over port 37777 when i am on 4G.
But i get an 502 code when i try any softphone app. Does someone know what i could be doing wrong?
Please please pretty please disable Upnp immediately, double check that ALL port forwards in your internet router are gone. Otherwise: remove them ASAP. You are exposing yourself to tons of botnet scans a day, and your VTO will be hacked. Period.

Read Cliff Notes or VPN Primer for Noobs. Please.

For push notifications to work on your gDMSS app, you need to open OUTBOUND port 2195 (not INBOUND).

Then it should work.

Hope this helps!
CC
 

Swiffer98

n3wb
Joined
Apr 22, 2019
Messages
5
Reaction score
0
Location
Netherlands
Please please pretty please disable Upnp immediately, double check that ALL port forwards in your internet router are gone. Otherwise: remove them ASAP. You are exposing yourself to tons of botnet scans a day, and your VTO will be hacked. Period.

Read Cliff Notes or VPN Primer for Noobs. Please.

For push notifications to work on your gDMSS app, you need to open OUTBOUND port 2195 (not INBOUND).

Then it should work.

Hope this helps!
CC
Thanks you for your reply,

I did try only port 2195, but i cant connect to that port with the gDMSS app, i do get an alert when the anti-temper switch is off on 37777.
 
Top