Dahua IP intercom: VTO3211D-P2 (new P & P4 ) door station - experience, review, firmware support?

vincenzohb

n3wb
Joined
Jan 17, 2019
Messages
1
Reaction score
0
Location
france
I , dou you know how i can reset the VTO for factory , because my log in admin is blaklisted in the VTO and it impossible to connect on web interface whit any PC.

I try to rest with the front button , but only le password is reset, on the back side, i try 10-15second on button, 5 short time, but i never reset/
could you help me?
thanks
 

Attachments

JCFR

n3wb
Joined
Jul 1, 2018
Messages
8
Reaction score
0
Location
France
Hello,
With this device, is it possible to get any output information :
- from the LAN wire, to know someone pushed a button
- from the analog wire ?
 

catcamstar

Known around here
Joined
Jan 28, 2018
Messages
1,659
Reaction score
1,193
Hello,
With this device, is it possible to get any output information :
- from the LAN wire, to know someone pushed a button
- from the analog wire ?
If I understand your questions correctly: your VTH (the touchpad screen) will ring and show video/audio when someone pushed a button, AND your phone/tablet will ring too, if configured. If you have the UTP version, no "analog wire" is used, but there are variants (eg VTO2000A-2) which uses 2-wire system. But that's to connect to a VTH screen as well.

Hope this helps
CC
 

JCFR

n3wb
Joined
Jul 1, 2018
Messages
8
Reaction score
0
Location
France
Hi,
I don't have any VTH, just smartphones or tablets. And i would like to receive the information someone is "knocking at the door" in case i don't have my smartphone near me when I am inside the house.
I managed to install a push button to open the door from inside the house. (I've got two same cables going from the home to the door, one is the Ethernet PoE, the other is also an ethernet cable but it is used for the 12v for the lock and for opening with a physical button).
So, if I was able to take 2 wires to get the information back to a physical switch, i will manage to plug something giving the indication.
 

ClaudioL

n3wb
Joined
Apr 2, 2019
Messages
12
Reaction score
2
Location
italy
hello everyone has any idea how to connect the dahua vto3221d to the ftritzbox 7530 ????
I uploaded the firmware with sip on dahua but it didn't help
 

Marco1981

n3wb
Joined
Apr 17, 2019
Messages
2
Reaction score
0
Location
France
Hello Everybody

A Lot of issue with the VTO3211 :

- SD Card unreconized - No SD card (FAT or FAT32 or NTFS etc...)
- Unable to change language : only english
- unable to disable speech : "wait a moment...."
- Resolution 2 Mpx : Just 720P
- Unable to update firmware (hang at 50%)

A very bad product !!

here above the files about this very bad product

I'm so glad because I installed it on my wall
Dahua send only 3221 firmware

Please let me know if any firmware exist in French
 

Attachments

catcamstar

Known around here
Joined
Jan 28, 2018
Messages
1,659
Reaction score
1,193
From an old excel file, I found:
VTO3211D-P2 main+ configuration 2.5.02.01.55942 2.5.02.01.57233 General_VTO3221D_Eng_P_32M_V1.000.0000.0.R.20171205.zip General_VTO3221D_EngBulCzeFinHgrPolSloSvn_P_32M_V1.000.00.0.R.20180120.data.zip, so try to look these files up (but they are not french).

The VTOXXX-firmwares are NOT for your device, they are for:
VTO1210A-X
VTO1210B-X
VTO1210C-X
VTO1220A
VTO1220B main 2.5.02.01.58010 General_VTOXXX_EngHgrBulSvnPolFinCzhSvk_P_16M_V3.120.1026000.0.R.20180130.zip
VTO6100C
VTO6000CM
VTO6210B(W)
VTO2000A(-C)

Hope this helps!
CC
 
  • Like
Reactions: int

ClaudioL

n3wb
Joined
Apr 2, 2019
Messages
12
Reaction score
2
Location
italy
ciao a tutti sono riuscito a collegare il VTO3211D al fritz box 7530 usando il sip firmware V3.200.0012001.0.R su Dahua ATTENZIONE !!! una volta installato questo firmware non è più possibile cambiarlo !!!! Ora posso usare i telefoni wireless come estensione per rispondere ma non riesco a vedere l'immagine dell'interfono sulla fritzfon su cui sto lavorando
 

catcamstar

Known around here
Joined
Jan 28, 2018
Messages
1,659
Reaction score
1,193
ciao a tutti sono riuscito a collegare il VTO3211D al fritz box 7530 usando il sip firmware V3.200.0012001.0.R su Dahua ATTENZIONE !!! una volta installato questo firmware non è più possibile cambiarlo !!!! Ora posso usare i telefoni wireless come estensione per rispondere ma non riesco a vedere l'immagine dell'interfono sulla fritzfon su cui sto lavorando
And now in English please? :)
 

usaf_pride

Pulling my weight
Joined
Mar 10, 2017
Messages
284
Reaction score
170
And now in English please? :)
Google Translate and my really old remembering of Italian. (I added the link to Fritz!box)

Hello everybody. I've managed to connect the VTO3211D to the Fritz!box 7530 using the sip firmware V3.200.0012001.0.R on Dahua. Warning, once you install this firmware, it is no longer possible to change it! I can now use wireless phones as an extension to answer, but I can't see the image of the intercom on the Fritz Phone. I'm still working on it.
 

Goncalo

n3wb
Joined
Apr 23, 2019
Messages
1
Reaction score
0
Location
portugal
Hello, I have one VTO3211D with 2 buttons and don't have any monitors. I can't make it work just for the phone.
Is anyone know a way to work just with the App and without a VTH?
Thank you.
 

ClaudioL

n3wb
Joined
Apr 2, 2019
Messages
12
Reaction score
2
Location
italy
Hello, I have one VTO3211D with 2 buttons and don't have any monitors. I can't make it work just for the phone.
Is anyone know a way to work just with the App and without a VTH?
Thank you.
You have 4 ways to do it

Use the Gdmss plus or lite app on your smartphone by enabling P2P from Dahua
-------------------
Using a fritz modem and recording the VTO3211 d as an ip intercom (doorbell) but there seems to be a problem, when you answer you end the call on the intercom.
-------------------
Changing the firmware on the Dahua with the amateur version with SIP server and recording above IP phones or the router (depending on what you have)
-------------------
Interposing an Asterisk type SIP server between router and intercom
-------------------

The problem is that if you change the firmware to the VTO with an original one they are problems and you never go back (that's what I did)

in my opinion the best thing is not to change the firmware and use the Gdmss app or interpose a SIP server in between.

In any case you are practicing SIP protocols and networks in general or it will be a bloodbath I took 2 weeks to make everything work and it is still not all ok :(
 

margan

Young grasshopper
Joined
Oct 27, 2018
Messages
37
Reaction score
1
Location
Italy
hi Claudio,

About one of the solution you suggested, i.e. interpose a SIP server, it's what I'd like to do. My project is to put an Asterix server on a raspberry and a fritzbox 3490 I own. I went from bad experience you can read in this forum since I've bricked my VTO 3211 trying to put another firmware in. The solution was to unbrick via serial uart interface. So I will never repeat this experience. Finally, is it possible to register on an asterix server the dauha VTO with original firmware and have access to all option with any tablet I want ?
 

ClaudioL

n3wb
Joined
Apr 2, 2019
Messages
12
Reaction score
2
Location
italy
I could not restore the original firmware, now I keep it, because I managed to do the configuration and..... go.

At the beginning of this 3d, you can read who did the same thing you want to do too. However the difficulties are not few, and it seems that you have to insert some command lines manually to avoid that the VTO closes the call. I do not go further in this explanation because I am a rookie, and I do not know how to do it, for this reason I have a different solution.

The VTO is like an IP phone, so you should be able to record it on any SIP server even with the original firmware.
The important thing is to make the correct configuration in the menu (Device manager) otherwise when you press the button the call is not forwarded correctly.

I had also tried to put the Asterisk server on the raspberry, but I couldn't connect the VTO because I didn't know Asterisk well and I was wrong about the configuration. Note: the menus you find on the VTO are different from those of Asterisk and different from Frit!Box this has sent me in big confusion

I advise you to use EyeBeam on a PC to configure Asterisk and then copy the configuration to the VTO, because every time you need to change parameters on the VTO you have to restart it! And that makes you waste a lot of time.
 

ClaudioL

n3wb
Joined
Apr 2, 2019
Messages
12
Reaction score
2
Location
italy
hi Claudio,

About one of the solution you suggested, i.e. interpose a SIP server, it's what I'd like to do. My project is to put an Asterix server on a raspberry and a fritzbox 3490 I own. I went from bad experience you can read in this forum since I've bricked my VTO 3211 trying to put another firmware in. The solution was to unbrick via serial uart interface. So I will never repeat this experience. Finally, is it possible to register on an asterix server the dauha VTO with original firmware and have access to all option with any tablet I want ?
Margan read this Dahua VTO2000A, SIP Firmware and Asterisk
and this guide
Software of your VTO3211 are same of VTO2000A
 
  • Like
Reactions: int

margan

Young grasshopper
Joined
Oct 27, 2018
Messages
37
Reaction score
1
Location
Italy

ClaudioL

n3wb
Joined
Apr 2, 2019
Messages
12
Reaction score
2
Location
italy
Thanks Claudio, yes I will do it, keep in mind that my vto unfortunately has not a SIP firmware like the title of that thread seems concerns. Thanks for all anyway !
You are wellcome !
I think you can do it even without SIP firmware
 

margan

Young grasshopper
Joined
Oct 27, 2018
Messages
37
Reaction score
1
Location
Italy
Hi to all,
Anyone here powered this VTO with POE. Mine did'nt switch on with a 24V POE injector. Really does need at least a 48V POE injector ?
 
Top