I noticed that the Oncam Grandeye Evolution 12 360 degree IP camera resets or reboots significantly more often
when I enable the second stream where the first stream is H264 and the second stream is MJPEG
even when I don't exceed the reduced frame rate constraints associated with operating with multiple streams.
Be warned it could be disablement of multi stream feature with firmware update.
If there is problem with ASIC (i.e special single-function encoder chip) they might not be able to fix it with software update.
Thats just guessing... Happened before.
Could we fix this Oncam Grandeye Evolution 12 360 degree IP camera frequent reset or reboot problem using a C++ program by either
1. sleeping 30 seconds after the Oncam Grandeye Evolution 12 360 degree IP camera resets or reboots and sending another HTTP REST command to the Oncam Grandeye Evolution 12 360 degree IP camera after it resets or reboots
2.
when I enable the second stream where the first stream is H264 and the second stream is MJPEG
even when I don't exceed the reduced frame rate constraints associated with operating with multiple streams.
Be warned it could be disablement of multi stream feature with firmware update.
If there is problem with ASIC (i.e special single-function encoder chip) they might not be able to fix it with software update.
Thats just guessing... Happened before.
Could we fix this Oncam Grandeye Evolution 12 360 degree IP camera frequent reset or reboot problem using a C++ program by either
1. sleeping 30 seconds after the Oncam Grandeye Evolution 12 360 degree IP camera resets or reboots and sending another HTTP REST command to the Oncam Grandeye Evolution 12 360 degree IP camera after it resets or reboots
2.
ONCAM Grandeye Camera has a timeout parameter in milliseconds, with a default value of 10000 millisecnds, which controls how long the camera firmware waits before returning a connection refused error message should the camera reset. Should I increase the value of the timeout parameters rather than waiting 30 seconds and trying to reconnect to the camera again?
Any help is greatly appreciated.
Any help is greatly appreciated.
Last edited by a moderator: