TechBill
Known around here
- Joined
- Nov 1, 2014
- Messages
- 1,772
- Reaction score
- 1,182
My camera are on NTSC firmware
dahua camera IVS schedule missing and IVS not recording
- Thread starter rado stefano
- Start date
My camera are on NTSC firmware
rado stefano
Getting the hang of it
I put that camera back in NTSC and it still works without doing Default reset.
The other cameras still do not work with exactly mirror settings!!!!
SquareEyes
Getting the hang of it
- Joined
- Sep 29, 2015
- Messages
- 241
- Reaction score
- 71
Except IP addresses?
rado stefano
Getting the hang of it
Yes
rado stefano
Getting the hang of it
So I did load back pal on the cameras and everything works now.
TechBill
Known around here
- Joined
- Nov 1, 2014
- Messages
- 1,772
- Reaction score
- 1,182
On all of your camera? That would be strange then
rado stefano
Getting the hang of it
Set back to NTSC firmware and so far so good. Apart from IVs skipping frames.
Yea all cameras.
rado stefano
Getting the hang of it
So anybody know any solutions to skipping frames during IVS events.
I read a lot on the forum about that problem when using NVR and it was the main reason I went with cameras only.
I had no idea the issue exist when recording directly to the camera internal microSD.
Also I wonder why there is 6 seconds delay. I would like to have the recording and pictures start exactly at the trigger. Non of the snapshots show any action
I read a lot on the forum about that problem when using NVR and it was the main reason I went with cameras only.
I had no idea the issue exist when recording directly to the camera internal microSD.
Also I wonder why there is 6 seconds delay. I would like to have the recording and pictures start exactly at the trigger. Non of the snapshots show any action
Last edited:
EMPIRETECANDY
IPCT Vendor
Hi Bill,
May i know if you test this on your cam? Seems the IVS recording have some bugs, i reported to dahua, but still no news.
TechBill
Known around here
- Joined
- Nov 1, 2014
- Messages
- 1,772
- Reaction score
- 1,182
One thing I noticed on cam is IVS is marked with yellow flags in record timeline.
Should IVS be marked with orange flags in record timeline like shown in SmatPSS
Is this a bug?
EMPIRETECANDY
IPCT Vendor
Bill,
Can you send me an email and with pics? I am collecting all the problems now to dahua hope this can be fixed soon. Thanks.
kingsecurit2014@163.com
Andy
TechBill
Known around here
- Joined
- Nov 1, 2014
- Messages
- 1,772
- Reaction score
- 1,182
Okay I am at work now but I will send it when I get home soon
EMPIRETECANDY
IPCT Vendor
they ask me to send full report for all problems we met, thanks, Bill
TechBill
Known around here
- Joined
- Nov 1, 2014
- Messages
- 1,772
- Reaction score
- 1,182
Hi All,
Just wanted to mention I have the same issue (missing IVS in schedule tab of storage)
It is because i'm using OS X with Safari. If I boot a windows machine and use IE then the IVS is appearing in the schedule overview.
Took me few hours to figure this out.... pain in the ass.
Just wanted to mention I have the same issue (missing IVS in schedule tab of storage)
It is because i'm using OS X with Safari. If I boot a windows machine and use IE then the IVS is appearing in the schedule overview.
Took me few hours to figure this out.... pain in the ass.
Hi,
I use the SD49225T-HN with firmware 2.6x and IVS ist working ok,
but with the IE 11.0.9600.18893 or Pale Moon there is no IVS option in Schedule.
In SmartPSS
which cam und which version of IE?
I use the SD49225T-HN with firmware 2.6x and IVS ist working ok,
but with the IE 11.0.9600.18893 or Pale Moon there is no IVS option in Schedule.
In SmartPSS
Frank van der Heide
Pulling my weight
I experience the same problem. I setup IVS and IVS works. I see that IVS is triggered, but it does not show up on the playback line. I only see the green (continuous recording) line and no orange recording line. Did you find a solution for this issue yet? I have a Dahua cam and Dahua NVR.
Hi Frank,
sorry for the late answer and sorry but until now i have no solution for this problem.
Pruts Rommel
n3wb
I’m using this camera: IPC-HDBW4431F-AS with FW 2.622.0000000.18.R, Build Date: 2017-11-10
Had problems with IVS. Could setup everything, and was working OK till I rebooted the camera. IVS was disabled after reboot, and video detection enabled again, and smart plan IVR disabled too.
Did a Default reset, tried again, still same problem. After that I did a Fatory Default reset, IP settings stay the same, tried again, and now settings are kept and working.
Only shame is that IVR does not seem to trigger an event, so iDMSS Plus does not popup any longer when some action is pickup up by the camera.
Had problems with IVS. Could setup everything, and was working OK till I rebooted the camera. IVS was disabled after reboot, and video detection enabled again, and smart plan IVR disabled too.
Did a Default reset, tried again, still same problem. After that I did a Fatory Default reset, IP settings stay the same, tried again, and now settings are kept and working.
Only shame is that IVR does not seem to trigger an event, so iDMSS Plus does not popup any longer when some action is pickup up by the camera.
TechBill
Known around here
- Joined
- Nov 1, 2014
- Messages
- 1,772
- Reaction score
- 1,182
Anytime changes is made to the IVS settings, you would need to turn off alarm then enable it again and go added the IVS back into it and save on DMSS