saggybeans
Young grasshopper
Hello All,
I recently purchased a HDW5231R-ZE from Andy @ empiretech and was hoping you guys could give me some tips for settings. I noticed that when there is motion (Day or Night) like a person running or a car moving that there is a blurry halo around the object. I heard that it is mainly due to either 3DNR (so I set to 10) and also exposure (specifically shutter rate). I tried to manually adjust the shutter but it seems to make the entire image a bit blurry and I couldn't get a setting that looked as crisp as auto. Turning down the 3DNR seemed to make it a bit better but I was hoping you guys can look at my settings and let me know if something seems off. My camera is situated on my porch facing the street. I have good white 5000k lighting in the front as well as LED street lighting so I enabled forced color and disabled IR and it seems to look better than B&W with IR. Here are my current settings:
H.265
1080P
15FPS
VBR
6(Best)
8192 Bit Rate
I Frame 15
Profile = Full Time (DAY)
Zoomed out Fully
Picture:
Style - Standard
Brightness - 50
Contrast - 50
Saturation - 50
Sharpness - 60
Gamma - 50
Exposure
Anti-Flicker - Outdoor
Mode - Auto
Auto Iris - ON
3DNR - ON
Grade - 10
Backlight = OFF
WB = Auto
Day & Night = Color
IR Light = OFF
I recently purchased a HDW5231R-ZE from Andy @ empiretech and was hoping you guys could give me some tips for settings. I noticed that when there is motion (Day or Night) like a person running or a car moving that there is a blurry halo around the object. I heard that it is mainly due to either 3DNR (so I set to 10) and also exposure (specifically shutter rate). I tried to manually adjust the shutter but it seems to make the entire image a bit blurry and I couldn't get a setting that looked as crisp as auto. Turning down the 3DNR seemed to make it a bit better but I was hoping you guys can look at my settings and let me know if something seems off. My camera is situated on my porch facing the street. I have good white 5000k lighting in the front as well as LED street lighting so I enabled forced color and disabled IR and it seems to look better than B&W with IR. Here are my current settings:
H.265
1080P
15FPS
VBR
6(Best)
8192 Bit Rate
I Frame 15
Profile = Full Time (DAY)
Zoomed out Fully
Picture:
Style - Standard
Brightness - 50
Contrast - 50
Saturation - 50
Sharpness - 60
Gamma - 50
Exposure
Anti-Flicker - Outdoor
Mode - Auto
Auto Iris - ON
3DNR - ON
Grade - 10
Backlight = OFF
WB = Auto
Day & Night = Color
IR Light = OFF
Last edited:
