One of my Amcrest camera's keep dropping signal on Blue Iris. When I look at the properties it shows no signal but it is showing 1.5 FPS. The camera is hardwired CAT-5E, with a AMCREST POE+ switch. When I access it from my iPhone on a mobile Amcrest program it works just fine. It is a Amcrest ip2m-848W camera. I've been using this camera on Blue Iris for over a year with no problems. It only started messing up after upgrading to Blue Iris V5.0. I have used IP Scan to make sure there are no other network conflicts with the IP address I am using. I can go unplug or reset the camera and it will work for about two days and do the same thing all over again! Also when using the google web browsers to view the camera it keeps popping up a red icon at the upper right of the screen saying Relay-Out, but I think that is just detecting the motion on the camera and is sending it to the relay-out for the alarm. One last thought. It is right at 100 degrees out could that be locking up the camera? I have two of these IP2M-858W camera's and the other one is working just fine. Both camera's are configured the same way. Just realized the Wifi was turned on on this camera. I have sense shut the Wifi off. Wonder if that could have been the problem. One last thing, I checked the SD card in the camera and it continued to record the whole time which is weird if the camera was down. Any idea's?