Dahua NVR on the TV screen problem

formycctv · Nov 11, 2019

Hi,

I can't start the NVR(Dahua NVR5216-16P-4KS2E), the Dahua logo can be seen on the TV screen for a few seconds and then the screen goes black and nothing happens. My tv Panasonic 4k plasma tv.

View attachment nvr5216.mp4

c hris527 · Nov 11, 2019

You have the splash screen, that a good sign, have you tried hooking up a vga monitor to the NVr and see what happens? looks like it might be going out of range, have you tried right clicking your mouse to see if a menu comes up? You might have to hook a laptop up to it and log on to the webgui and log in that way and then you can see what your video output "display" says. I saw your TV says 720p with a 16:9 ratio, If you can do it with a laptop with your TV running side by side, you can use your laptop to adjust display output.

toolazyforalogin · Nov 12, 2019

Yes I had the same issue on the tv I first tried to use with HDMI. The resolution would not display properly. I used a second tv and set the resolution to 16:9 and then the first tv worked via hdmi afterwards. No problems since.

formycctv · Nov 13, 2019

c hris527 said:
You have the splash screen, that a good sign, have you tried hooking up a vga monitor to the NVr and see what happens? looks like it might be going out of range, have you tried right clicking your mouse to see if a menu comes up? You might have to hook a laptop up to it and log on to the webgui and log in that way and then you can see what your video output "display" says. I saw your TV says 720p with a 16:9 ratio, If you can do it with a laptop with your TV running side by side, you can use your laptop to adjust display output.

I can't log on to the webgui

formycctv · Nov 13, 2019

toolazyforalogin said:
Yes I had the same issue on the tv I first tried to use with HDMI. The resolution would not display properly. I used a second tv and set the resolution to 16:9 and then the first tv worked via hdmi afterwards. No problems since.

Thanks,i will try later.

c hris527 · Nov 13, 2019

formycctv said:
I can't log on to the webgui

Lets take a step back here, Is this brand new setup or has this been running OK and you starting having problems. I assumed by your post this was a new setup.

formycctv · Nov 13, 2019

c hris527 said:
Lets take a step back here, Is this brand new setup or has this been running OK and you starting having problems. I assumed by your post this was a new setup.

Yes,it's brand new setup

c hris527 · Nov 14, 2019

formycctv said:
I can't log on to the webgui

How are you trying to log in? Are you using a Laptop or Windows based PC ? what is your NVR's IP address, If you are using either of the two can you ping your NVr ?

formycctv · Nov 15, 2019

Hi,disconnecting the TV and disk is the solution to the problem.

c hris527 · Nov 15, 2019

formycctv said:
Hi,disconnecting the TV and disk is the solution to the problem.

Disk?

Search

Dahua NVR on the TV screen problem

formycctv

n3wb

c hris527

Known around here

toolazyforalogin

Getting the hang of it

formycctv

n3wb

formycctv

n3wb

c hris527

Known around here

formycctv

n3wb

c hris527

Known around here

formycctv

n3wb

c hris527

Known around here