I am looking for a firmware flashed

Bidikman

n3wb
Joined
Oct 21, 2020
Messages
7
Reaction score
2
Location
FRANCE
Hello I am looking for this firmware for my cam: IPCAM C6F0SoZ3N0PcL2 I am looking for the original firmware or higher than this: Software version: V19.1.14.16.28-20200813 / Webware version: V3.0.7.1 car I have a problem the camera movement commands are inverted, up, down, left, and right and in addition I can not do a factory reset, when I do it does not erase everything completely it keeps certain to give in memory ,thank you.
 

Attachments

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
is it one of these? s-l1600.jpg
if so, i have the same unit, or at least it lists as the same 'Device Type'...Capture.PNG

you might find something here (for the HX-series): Firmware | SV3C
 

Bidikman

n3wb
Joined
Oct 21, 2020
Messages
7
Reaction score
2
Location
FRANCE
[QUOTE = "pozzello, message: 495716, membre: 10524"]
est-ce l'un de ceux-ci? View attachment 73053
si c'est le cas, j'ai le même appareil, ou du moins il est répertorié comme le même `` type de périphérique '' ...View attachment 73052

vous pouvez trouver quelque chose ici (pour la série HX): Firmware | SV3C
[/CITATION]

Thank you to you, my model and this one: 30X Zoom 5MP PTZ Caméra de Surveillance WiFi Extérieure Ctronics Caméra IP Suivi Automatique Détection Humaine Vision Nocturne 150M Rotation 355 °90° Alarme Sonore Audio Bidirectionnel Etanchéité IP66: Amazon.fr: High-tech I'm afraid that messes up my device
 

Bidikman

n3wb
Joined
Oct 21, 2020
Messages
7
Reaction score
2
Location
FRANCE
[QUOTE = "pozzello, message: 495727, membre: 10524"]
peut-etre demander ici? Télécharger
[/CITATION]
Je leur ai laissé un message hier et pas de réponse pour le moment, je viens ici pour voir si je peux débloquer le devis.
 

Bidikman

n3wb
Joined
Oct 21, 2020
Messages
7
Reaction score
2
Location
FRANCE
[QUOTE = "pozzello, message: 495727, membre: 10524"]
peut-etre demander ici? Télécharger
[/CITATION]
Je leur ai laissé un message hier et pas de réponse pour le moment, je viens ici pour voir si je peux débloquer le devis.
I left them a message yesterday and no reply for the moment, I am coming here to see if I can unlock the quotation.
 

AleksScep

n3wb
Joined
Dec 29, 2020
Messages
1
Reaction score
0
Location
South Africa
Hello I am looking for this firmware for my cam: IPCAM C6F0SoZ3N0PcL2 I am looking for the original firmware or higher than this: Software version: V19.1.14.16.28-20200813 / Webware version: V3.0.7.1 car I have a problem the camera movement commands are inverted, up, down, left, and right and in addition I can not do a factory reset, when I do it does not erase everything completely it keeps certain to give in memory ,thank you.
Hi. Have you been able to resolve the Problem ?. I Seem to have the Same problem as you. If you have indeed solved the Problem, Please could you Share.
 

Sanyi126

n3wb
Joined
Jan 11, 2021
Messages
3
Reaction score
2
Location
Hungary
Hi!
For me, PTZ doesn't turn back after motion tracking by default (preset1). I can't update the firmware either. It's the same version.
 

giankymis

n3wb
Joined
Mar 6, 2016
Messages
2
Reaction score
1
Hello, i have just bought the same camera but at the beginning i had the same problem of [U]Sanyi126:[/U] Camera don't turn back on preset 1 after autotrack.
after 5 minutes autotrack stop works and i not have idea how i can re-enable it.
I have read user manual but didn't find any word about enable or disable that function.
Any idea?
I have try to upgrade fw on ipcam.xin site
 

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
ah, the handy-dandy config options hidden in the presets. of course!. so intuitive... not.

Good info! thanx.
 

bugmenot01

Young grasshopper
Joined
Dec 31, 2015
Messages
66
Reaction score
8
I have a similar cam, it is a 30X Zoom, 5MP, built-in speaker/mic, standard Wi-Fi and Ethernet (no POE), AI (human) tracking, SD card slot, 6 cruise groups, Hi3516EV300 chipset with Sony STARVIS IMX335 camera element, 6 IR LEDs, and external power/ethernet/resetbutton cables. This one has a slightly different model number (device type), it is an IPCAM C6F0SoZ3N0PcL2 running firmware V19.1.14.16.28-20200416. It appears to have its own PTZ hidden command layout that's different than the ones above. The annoyance I have is that the PTZ motors don't seem to rest at idle (causing indoor noise and additional noise on the built-in mic). I'd love to find a firmware update for it, but no luck yet.

Here are some of the PTZ codes I've figured out:
CALL 76 - Cruise Group #1 (1-16)
CALL 77 - Cruise Group #2 (17-32)
CALL 78 - Cruise Group #3 (33-48)
CALL 79 - Cruise Group #4 (49-64)
CALL 80 - Cruise Group #5 (65-76)
CALL 81 - Cruise Group #6 (81-94)
CALL 100 - Halt Cruising Immediately
CALL 99 - Cruise between preset #62 and #63 (exits for reasons unknown)
CALL 97 - Cruise between preset #62 and #63 (exits for reasons unknown)
CALL 96 - Halt Cruising When Preset Is Reached
CALL 92 - Clear All Preset and Reset PTZ Camera
CALL 91 - Recalibrate PTZ Motor Positioning

I'm still trying to work out human auto-tracking. I know I can enable it by SETing a guard position at 86, then CALLing 86, CALLing 66, CALLing 69, then moving to a different position and SETting 67, then CALLing 67. At that point, it automatically tracks people (moving the camera as necessary) and automatically zooms in on a new target to get a good view of their upper-torso. The codes as I understand them so far are...

SET 86 - Set Guard Position (default position it automatically returns to)
CALL 86 - Enable Guard Function. If the AI moves the camera, or you do a call, it will automatically return to this spot after a short period of time. Manually moving the PTZ position appears to cancel
CALL 66 - Enable Human Tracking
CALL 68 - Disable Human Tracking
CALL 69 - Enable Human Auto Zoom (performs an initial close-up zoom when a new target is acquired)
CALL 70 - Disable Human Auto Zoom

Anyhow, I'm looking for firmware (or PTZ codes like those above). And if you've got a version of this CamHi / IPCAM / whatever it is that obeys the above codes and is higher than V19.1.14.16.28, all the better! :)
 
Top