Missing Audio Tab in Configuration - DS-2CD2132F-IS - V5.2.5 build 141201

cody00

n3wb
Joined
Aug 22, 2015
Messages
7
Reaction score
3
Hi All,

I have hooked up a powered mic to my DS-2CD2132F-IS, went to enable in settings, and the option is not there. Under Advanced -> Video/Audio -> , I only see "Video", "ROI", and "Display Info On Stream" tabs. Anyone have any ideas? Do I need a different firmware?

Kind Regards,
Cody
 

fenderman

Staff member
Joined
Mar 9, 2014
Messages
36,897
Reaction score
21,250
Hi All,

I have hooked up a powered mic to my DS-2CD2132F-IS, went to enable in settings, and the option is not there. Under Advanced -> Video/Audio -> , I only see "Video", "ROI", and "Display Info On Stream" tabs. Anyone have any ideas? Do I need a different firmware?

Kind Regards,
Cody
That is strange..first thing is to clear the browser of the plugin and try reinstalling it...or try another browser..
if that doesnt work, try pushing the 5.2.5 firmware again via tftp....read the threads on this subject so you dont brick your camera.
 

cody00

n3wb
Joined
Aug 22, 2015
Messages
7
Reaction score
3
Well, I tried flashing the firmware again , resetting to default settings, using different computer, different browsers. any other ideas?
 

cody00

n3wb
Joined
Aug 22, 2015
Messages
7
Reaction score
3
Maybe it's a DS-2CD2132F-I ? Have you checked in SADP?
It does show "DS-2CD2132F-IS" in SADP.

Someone had recommended running the SSH command cat /proc/kmsg which provided the following.. He also recommended as karmadhi that it is probably faulty camera.


# cat /proc/kmsg<5>[ 0.000000] Linux version 2.6.38.8 (root@HIK-RD-CI-Frontend) (gcc version 4.6.1 (Sourcery CodeBench Lite 2011.09-70) )
<5>[ 0.000000] #33 PREEMPT Fri Oct 24 10:46:55 CST 2014
<4>[ 0.000000] CPU: ARMv6-compatible processor [4117b365] revision 5 (ARMv6TEJ), cr=00c5387f
<4>[ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[ 0.000000] Machine: Coconut
<4>[ 0.000000] Memory policy: ECC disabled, Data cache writeback
<6>[ 0.000000] Ambarella: AHB = 0x60000000[0xf0000000],0x01000000 0
<6>[ 0.000000] Ambarella: APB = 0x70000000[0xf1000000],0x01000000 0
<6>[ 0.000000] Ambarella: PPM = 0xc0000000[0xe0000000],0x00200000 9
<6>[ 0.000000] Ambarella: BSB = 0xc8c00000[0xe8c00000],0x00400000 9
<6>[ 0.000000] Ambarella: DSP = 0xc9000000[0xe9000000],0x07000000 9
<6>[ 0.000000] Ambarella: HAL = 0xc00a0000[0xfee00000],0x0000e708 9
<7>[ 0.000000] On node 0 totalpages: 25344
<7>[ 0.000000] free_area_init_node: node 0, pgdat c04dd028, node_mem_map c0503000
<7>[ 0.000000] Normal zone: 198 pages used for memmap
<7>[ 0.000000] Normal zone: 0 pages reserved
<7>[ 0.000000] Normal zone: 25146 pages, LIFO batch:7
<4>[ 0.000000] bootmem_init: high_memory = 0xc8a00000
<7>[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
<7>[ 0.000000] pcpu-alloc: [0] 0
<4>[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 25146
<5>[ 0.000000] Kernel command line: console=ttyS0 initrd=0xc0a00000,0x400000 rw root=/dev/ram dbg=0 KRN_PRT=pri RMD_PRT=pri reserved=0xc6500000,0x100000,99 video=amb0fb:720x480,720x480,1,0
<6>[ 0.000000] PID hash table entries: 512 (order: -1, 2048 bytes)
<6>[ 0.000000] Dentry cache hash table entries: 16384 (order: 4, 65536 bytes)
<6>[ 0.000000] Inode-cache hash table entries: 8192 (order: 3, 32768 bytes)
<6>[ 0.000000] Memory: 99MB = 99MB total
<5>[ 0.000000] Memory: 91192k/91192k available, 10184k reserved, 0K highmem
<5>[ 0.000000] Virtual kernel memory layout:
<5>[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
<5>[ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB)
<5>[ 0.000000] DMA : 0xfe600000 - 0xfee00000 ( 8 MB)
<5>[ 0.000000] vmalloc : 0xc9000000 - 0xe0000000 ( 368 MB)
<5>[ 0.000000] lowmem : 0xc0000000 - 0xc8a00000 ( 138 MB)
<5>[ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB)
<5>[ 0.000000] .init : 0xc0008000 - 0xc002d000 ( 148 kB)
<5>[ 0.000000] .text : 0xc002d000 - 0xc04aa000 (4596 kB)
<5>[ 0.000000] .data : 0xc04aa000 - 0xc04dd6e0 ( 206 kB)
<6>[ 0.000000] Preemptable hierarchical RCU implementation.
<6>[ 0.000000] RCU-based detection of stalled CPUs is disabled.
<6>[ 0.000000] Verbose stalled-CPUs detection is disabled.
<6>[ 0.000000] NR_IRQS:224
<6>[ 0.000000] sched_clock: 32 bits at 72MHz, resolution 13ns, wraps every 59652ms
<2>[ 0.000000] sched_clock: wrong multiply/shift: 1864135111>>27 vs calculated 3728270222>>28
<2>[ 0.000000] sched_clock: fix multiply/shift to avoid scheduler hiccups
<4>[ 0.000000] Console: colour dummy device 80x30
<6>[ 0.000000] console [ttyS0] enabled
<6>[ 0.000601] Calibrating delay loop... 525.92 BogoMIPS (lpj=2629632)
<6>[ 0.260141] pid_max: default: 32768 minimum: 301
<4>[ 0.260565] Mount-cache hash table entries: 512
<6>[ 0.261366] CPU: Testing write buffer coherency: ok
<6>[ 0.268085] NET: Registered protocol family 16
<6>[ 0.279074] Ambarella Coconut:
<6>[ 0.279109] chip id: 5100
<6>[ 0.279123] board type: 3
<6>[ 0.279138] board revision: 10
<6>[ 0.279151] chip name: a5m
<6>[ 0.279164] HAL version: 176869
<6>[ 0.279180] reference clock: 24000000
<6>[ 0.279197] system configuration: 0x062004ea
<6>[ 0.279215] boot type: 0x00000002
<6>[ 0.279230] hif type: 0x00000000
<4>[ 0.307432] bio: create slab <bio-0> at 0
<6>[ 0.310005] ambarella-spi ambarella-spi.0: ambarella SPI Controller 0 created
<5>[ 0.321162] ambarella-i2c ambarella-i2c.0: Ambarella Media Processor I2C adapter[i2c-0] probed!
<5>[ 0.322732] ambarella-i2c ambarella-i2c.1: Ambarella Media Processor I2C adapter[i2c-1] probed!
<6>[ 0.324197] i2c i2c-0: Added multiplexed i2c bus 2
<6>[ 0.324240] ambarella-i2cmux ambarella-i2cmux.0: mux on ambarella-i2c adapter
<6>[ 0.327221] Advanced Linux Sound Architecture Driver Version 1.0.23.
<6>[ 0.331506] cfg80211: Calling CRDA to update world regulatory domain
<6>[ 0.333175] Switching to clocksource ambarella-cs-timer
<6>[ 0.340196] Switched to NOHz mode on CPU #0
<6>[ 0.397470] NET: Registered protocol family 2
<6>[ 0.397832] IP route cache hash table entries: 1024 (order: 0, 4096 bytes)
<6>[ 0.398746] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
<6>[ 0.398958] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
<6>[ 0.399105] TCP: Hash tables configured (established 4096 bind 4096)
<6>[ 0.399127] TCP reno registered
<6>[ 0.399157] UDP hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.399204] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
<6>[ 0.399845] NET: Registered protocol family 1
<6>[ 0.400763] RPC: Registered udp transport module.
<6>[ 0.400802] RPC: Registered tcp transport module.
<6>[ 0.400823] RPC: Registered tcp NFSv4.1 backchannel transport module.
<6>[ 0.401341] Trying to unpack rootfs image as initramfs...
<6>[ 0.403987] rootfs image is not initramfs (no cpio magic); looks like an initrd
<6>[ 0.438753] Freeing initrd memory: 4096K
<0>[ 0.441777] [ kernel version: svn-97978 ]
<4>[ 0.441882] mmc0 power register success!
<4>[ 0.441925] mmc1 power register success!
<6>[ 0.442065] reboot times :7
<6>[ 0.465063] msgmni has been set to 186
<6>[ 0.473781] alg: No test for stdrng (krng)
<6>[ 0.473943] io scheduler noop registered
<6>[ 0.473974] io scheduler deadline registered
<6>[ 0.474149] io scheduler cfq registered (default)
<6>[ 0.477916] ambarella-fb ambarella-fb.0: probe p[720x480] v[720x576] c[1] b[0] l[736] @ [0xc5980000:0x00068000]!
<6>[ 0.479777] ambarella-uart.0: ttyS0 at MMIO 0x70005000 (irq = 9) is a ambuart
<6>[ 0.516531] brd: module loaded
<6>[ 0.530990] loop: module loaded
<6>[ 0.534602] NAND device: Manufacturer ID: 0xc2, Chip ID: 0xf1 (MXIC NAND 128MiB 3,3V 8-bit)
<4>[ 0.534649] ambarella_nand_config_flash: 0x02e00140, 0x02c00140
<7>[ 0.535055] Bad block table found at page 65472, version 0x01
<7>[ 0.535591] Bad block table found at page 65408, version 0x01
<7>[ 0.535888] nand_read_bbt: Bad block at 0x000000500000
<7>[ 0.535929] nand_read_bbt: Bad block at 0x000002c20000
<6>[ 0.541551] ambarella-nand ambarella-nand: ambarella_nand_probe: Partition infomation found!
<5>[ 0.541615] Creating 18 MTD partitions on "ambnand":
<5>[ 0.541655] 0x000000000000-0x000000020000 : "bst"
<5>[ 0.545882] 0x000000020000-0x000000120000 : "ptb"
<5>[ 0.549675] 0x000000120000-0x000000220000 : "bld"
<5>[ 0.553744] 0x000000220000-0x000000320000 : "hal"
<5>[ 0.557657] 0x000000320000-0x000000420000 : "ano_ptb"
<5>[ 0.561578] 0x000000420000-0x0000004a0000 : "env"
<5>[ 0.565859] 0x0000004a0000-0x000000520000 : "param"
<5>[ 0.569867] 0x000000520000-0x000000620000 : "dpt"
<5>[ 0.574205] 0x000000620000-0x000001020000 : "rcvy"
<5>[ 0.578406] 0x000001020000-0x000001820000 : "krn_pri"
<5>[ 0.582320] 0x000001820000-0x000002020000 : "krn_sec"
<5>[ 0.586545] 0x000002020000-0x000002420000 : "rmd_pri"
<5>[ 0.590532] 0x000002420000-0x000002820000 : "rmd_sec"
<5>[ 0.594859] 0x000002820000-0x000004020000 : "app_pri"
<5>[ 0.598988] 0x000004020000-0x000005820000 : "app_sec"
<5>[ 0.603196] 0x000005820000-0x000005c20000 : "cfg_pri"
<5>[ 0.607621] 0x000005c20000-0x000006020000 : "cfg_sec"
<5>[ 0.611921] 0x000006020000-0x000007020000 : "dbg"
<6>[ 0.623495] PPP generic driver version 2.4.2
<6>[ 0.624929] PPP Deflate Compression module registered
<6>[ 0.624972] PPP BSD Compression module registered
<6>[ 0.819911] Ambarella MII Bus: probed
<5>[ 0.821592] ambarella-eth ambarella-eth.0: MAC Address[48:11:b2:24:cb:bb].
<6>[ 0.822338] console [netcon0] enabled
<6>[ 0.822368] netconsole: network logging started
<6>[ 0.824169] mousedev: PS/2 mouse device common for all mice
<6>[ 0.825231] input: AmbInput as /devices/virtual/input/input0
<6>[ 0.826269] ambarella_gpio_irq_set_wake: irq[75] = girq[11] = 1
<5>[ 0.826314] ambarella-input ambarella-input: AmbInput probed!
<5>[ 0.827339] ambarella-adc ambarella-adc: ADC Host Controller [polling mode] probed!
<6>[ 0.829038] ambarella-rtc ambarella-rtc: rtc core: registered ambarella-rtc as rtc0
<6>[ 0.829632] i2c /dev entries driver
<5>[ 0.834748] ambarella-wdt ambarella-wdt: Ambarella Media Processor Watch Dog Timer[ambarella-wdt].
<6>[ 0.841503] ALSA device list:
<6>[ 0.841537] No soundcards found.
<6>[ 0.841719] Netfilter messages via NETLINK v0.30.
<6>[ 0.841925] nf_conntrack version 0.5.0 (1488 buckets, 5952 max)
<6>[ 0.842584] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.842759] TCP cubic registered
<6>[ 0.843192] NET: Registered protocol family 10
<6>[ 0.846003] Mobile IPv6
<6>[ 0.846139] ip6_tables: (C) 2000-2006 Netfilter Core Team
<6>[ 0.846400] IPv6 over IPv4 tunneling driver
<6>[ 0.850268] NET: Registered protocol family 17
<6>[ 0.851102] sctp: Hash tables configured (established 4096 bind 8192)
<7>[ 0.851455] sctp: sctp_init_sock(sk: c58d7b20)
<6>[ 0.851579] lib80211: common routines for IEEE802.11 drivers
<7>[ 0.851612] lib80211_crypt: registered algorithm 'NULL'
<6>[ 0.856004] ambarella-rtc ambarella-rtc: setting system clock to 2015-09-14 11:13:51 UTC (1442229231)
<5>[ 0.856847] RAMDISK: gzip image found at block 0
<4>[ 1.674145] EXT2-fs (ram0): warning: maximal mount count reached, running e2fsck is recommended
<4>[ 1.674335] VFS: Mounted root (ext2 filesystem) on device 1:0.
<6>[ 1.674547] Freeing init memory: 148K
<5>[ 3.703222] UBI: attaching mtd13 to ubi1
<5>[ 3.703382] UBI: physical eraseblock size: 131072 bytes (128 KiB)
<5>[ 3.703412] UBI: logical eraseblock size: 129024 bytes
<5>[ 3.703432] UBI: smallest flash I/O unit: 2048
<5>[ 3.703449] UBI: sub-page size: 512
<5>[ 3.703467] UBI: VID header offset: 512 (aligned 512)
<5>[ 3.703488] UBI: data offset: 2048
<5>[ 3.762268] UBI: max. sequence number: 392
<5>[ 3.783438] UBI: attached mtd13 to ubi1
<5>[ 3.783471] UBI: MTD device name: "app_pri"
<5>[ 3.783494] UBI: MTD device size: 24 MiB
<5>[ 3.783513] UBI: number of good PEBs: 191
<5>[ 3.783529] UBI: number of bad PEBs: 1
<5>[ 3.783545] UBI: number of corrupted PEBs: 0
<5>[ 3.783560] UBI: max. allowed volumes: 128
<5>[ 3.783577] UBI: wear-leveling threshold: 4096
<5>[ 3.783593] UBI: number of internal volumes: 1
<5>[ 3.783609] UBI: number of user volumes: 1
<5>[ 3.783625] UBI: available PEBs: 0
<5>[ 3.783641] UBI: total number of reserved PEBs: 191
<5>[ 3.783658] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 3.783679] UBI: max/mean erase counter: 26/18
<5>[ 3.783695] UBI: image sequence number: 1364008951
<5>[ 3.791750] UBI: background thread "ubi_bgt1d" started, PID 630
<5>[ 3.870488] UBIFS: recovery needed
<5>[ 3.909821] UBIFS: recovery completed
<5>[ 3.909870] UBIFS: mounted UBI device 1, volume 0, name "app_pri"
<5>[ 3.909900] UBIFS: file system size: 22708224 bytes (22176 KiB, 21 MiB, 176 LEBs)
<5>[ 3.909928] UBIFS: journal size: 1161216 bytes (1134 KiB, 1 MiB, 9 LEBs)
<5>[ 3.909953] UBIFS: media format: w4/r0 (latest is w4/r0)
<5>[ 3.909972] UBIFS: default compressor: lzo
<5>[ 3.909990] UBIFS: reserved for root: 1072565 bytes (1047 KiB)
<5>[ 6.460830] UBI: attaching mtd15 to ubi3
<5>[ 6.460873] UBI: physical eraseblock size: 131072 bytes (128 KiB)
<5>[ 6.460898] UBI: logical eraseblock size: 129024 bytes
<5>[ 6.460917] UBI: smallest flash I/O unit: 2048
<5>[ 6.460935] UBI: sub-page size: 512
<5>[ 6.460953] UBI: VID header offset: 512 (aligned 512)
<5>[ 6.460973] UBI: data offset: 2048
<5>[ 6.469743] UBI: max. sequence number: 98
<5>[ 6.493487] UBI: attached mtd15 to ubi3
<5>[ 6.493521] UBI: MTD device name: "cfg_pri"
<5>[ 6.493543] UBI: MTD device size: 4 MiB
<5>[ 6.493560] UBI: number of good PEBs: 32
<5>[ 6.493576] UBI: number of bad PEBs: 0
<5>[ 6.493592] UBI: number of corrupted PEBs: 0
<5>[ 6.493608] UBI: max. allowed volumes: 128
<5>[ 6.493625] UBI: wear-leveling threshold: 4096
<5>[ 6.493641] UBI: number of internal volumes: 1
<5>[ 6.493657] UBI: number of user volumes: 1
<5>[ 6.493673] UBI: available PEBs: 0
<5>[ 6.493689] UBI: total number of reserved PEBs: 32
<5>[ 6.493707] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 6.493727] UBI: max/mean erase counter: 31/29
<5>[ 6.493744] UBI: image sequence number: 489670391
<5>[ 6.501759] UBI: background thread "ubi_bgt3d" started, PID 640
<5>[ 6.576618] UBIFS: recovery needed
<5>[ 6.613893] UBIFS: recovery completed
<5>[ 6.613940] UBIFS: mounted UBI device 3, volume 0, name "cfg_pri"
<5>[ 6.613969] UBIFS: file system size: 2193408 bytes (2142 KiB, 2 MiB, 17 LEBs)
<5>[ 6.613996] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
<5>[ 6.614021] UBIFS: media format: w4/r0 (latest is w4/r0)
<5>[ 6.614042] UBIFS: default compressor: lzo
<5>[ 6.614060] UBIFS: reserved for root: 103599 bytes (101 KiB)
<5>[ 6.711351] UBI: attaching mtd16 to ubi4
<5>[ 6.711392] UBI: physical eraseblock size: 131072 bytes (128 KiB)
<5>[ 6.711415] UBI: logical eraseblock size: 129024 bytes
<5>[ 6.711433] UBI: smallest flash I/O unit: 2048
<5>[ 6.711451] UBI: sub-page size: 512
<5>[ 6.711469] UBI: VID header offset: 512 (aligned 512)
<5>[ 6.711489] UBI: data offset: 2048
<5>[ 6.720187] UBI: max. sequence number: 107
<5>[ 6.744193] UBI: attached mtd16 to ubi4
<5>[ 6.744227] UBI: MTD device name: "cfg_sec"
<5>[ 6.744251] UBI: MTD device size: 4 MiB
<5>[ 6.744268] UBI: number of good PEBs: 32
<5>[ 6.744285] UBI: number of bad PEBs: 0
<5>[ 6.744301] UBI: number of corrupted PEBs: 0
<5>[ 6.744317] UBI: max. allowed volumes: 128
<5>[ 6.744333] UBI: wear-leveling threshold: 4096
<5>[ 6.744350] UBI: number of internal volumes: 1
<5>[ 6.744365] UBI: number of user volumes: 1
<5>[ 6.744381] UBI: available PEBs: 0
<5>[ 6.744397] UBI: total number of reserved PEBs: 32
<5>[ 6.744415] UBI: number of PEBs reserved for bad PEB handling: 2
<5>[ 6.744436] UBI: max/mean erase counter: 32/30
<5>[ 6.744452] UBI: image sequence number: 2004220474
<5>[ 6.752467] UBI: background thread "ubi_bgt4d" started, PID 651
<5>[ 6.827304] UBIFS: recovery needed
<5>[ 6.879636] UBIFS: recovery completed
<5>[ 6.879684] UBIFS: mounted UBI device 4, volume 0, name "cfg_sec"
<5>[ 6.879713] UBIFS: file system size: 2193408 bytes (2142 KiB, 2 MiB, 17 LEBs)
<5>[ 6.879741] UBIFS: journal size: 1032193 bytes (1008 KiB, 0 MiB, 6 LEBs)
<5>[ 6.879765] UBIFS: media format: w4/r0 (latest is w4/r0)
<5>[ 6.879784] UBIFS: default compressor: lzo
<5>[ 6.879802] UBIFS: reserved for root: 103599 bytes (101 KiB)
<5>[ 8.072648] net eth0: Could not find default PHY in 9.
<5>[ 8.072690] net eth0: Try PHY[3] whose id is 0x001cc816!
<6>[ 8.076173] ADDRCONF(NETDEV_UP): eth0: link is not ready
<6>[ 10.063646] PHY: 0:03 - Link is Up - 100/Full
<6>[ 10.063863] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
<4>[ 16.147167] dsp: module license 'Proprietary' taints kernel.
<4>[ 16.147207] Disabling lock debugging due to kernel taint
<4>[ 16.226073] img: aaa_fifo2_base malloc c2b50000
<4>[ 16.645794] >>>>>> DSP LOG ADDR START PHY 0xc0080000
<7>[ 16.645828] Init software HR timer for DSP communication
<6>[ 16.675603] cdev_init rs485_fops ...
<6>[ 16.675654] adding uart1, minor = 0
<6>[ 16.679222] Successfully insmod uart232 module!
<6>[ 16.820629] amba_debug_init 248:248.
<7>[ 20.283312] eth0: no IPv6 routers present
<6>[ 32.785188] AMBARELLA SoC Audio DUMMY Codec
<6>[ 32.786720] asoc: AMBARELLA_DUMMY_CODEC <-> ambarella-i2s.0 mapping ok
<4>[ 33.649471] MT9T002 sensor ID is 0x2604
<6>[ 33.699476] CMEMK module: built on Aug 23 2012 at 17:05:43
<6>[ 33.699523] Reference Linux version 2.6.38
<6>[ 33.699543] File /mnt/data_bsp/data_yuhuanhuan/raptor/a5s_svn2/kernel/hik_drivers/cmem/src/module/cmemk.c
<6>[ 33.707227] cmemk initialized
<4>[ 43.449631] iav error: Failed to wait for completion!
<4>[ 43.518743] iav error: Failed to wait for completion!
 

karmadhi

Young grasshopper
Joined
Mar 11, 2015
Messages
36
Reaction score
9
i know this problem and you got no chance to fix it, thats why you need to return to the seller. they hacked the firmware and put the wrong s/n there, that's why it's not working on audio.
 

alastairstevenson

Staff member
Joined
Oct 28, 2014
Messages
15,930
Reaction score
6,778
Location
Scotland
<7>[ 20.283312] eth0: no IPv6 routers present
<6>[ 32.785188] AMBARELLA SoC Audio DUMMY Codec
<6>[ 32.786720] asoc: AMBARELLA_DUMMY_CODEC <-> ambarella-i2s.0 mapping ok
<4>[ 33.649471] MT9T002 sensor ID is 0x2604
I believe that's correct - the fragment above suggests that the Linux kernel finds no real audio hardware in the environment.
 
Top