The Chinese camera does not start up

fido

n3wb
Joined
Jan 24, 2021
Messages
7
Reaction score
0
Location
Poland
Hello.
I got a camera like in the picture. Firmware from files has been uploaded to it
1.kernel.bin
2.rootfs.bin
3.user.bin
Now only the red LED is on and after connecting to the router it is orange and the green LED is blinking at the LAN connector.
As you can see in the photo, the LEDs are lit from the night illumination.
Is there any chance to start this camera because, from what I associate, it should test by turning left / right and up / down.
1611487751389.jpg1611487751395.jpg
 

wittaj

IPCT Contributor
Joined
Apr 28, 2019
Messages
24,438
Reaction score
47,563
Location
USA
Did it work when you received it and you then tried to update the firmware? If so, you likely bricked it as it would be a Chinese hacked computer.
 

IAmATeaf

Known around here
Joined
Jan 13, 2019
Messages
3,287
Reaction score
3,252
Location
United Kingdom
If it hasn’t been bricked, find out what the default IP address is, then change your laptop to be on the same subnetwork and see if you can connect to it using a browser.
 

fido

n3wb
Joined
Jan 24, 2021
Messages
7
Reaction score
0
Location
Poland
Did it work when you received it and you then tried to update the firmware? If so, you likely bricked it as it would be a Chinese hacked computer.
The camera is already a few years old and it was working normally. Now the problems started and I wanted to upload newer software. I had the software from a Chinese. I used to upload this software to a similar camera and there was no problem.

If it hasn’t been bricked, find out what the default IP address is, then change your laptop to be on the same subnetwork and see if you can connect to it using a browser.
How to check the default address? The router does not show that there is any device connected. I wanted to take advantage
ONVIF Device Manager but finds nothing.
 

SouthernYankee

IPCT Contributor
Joined
Feb 15, 2018
Messages
5,170
Reaction score
5,320
Location
Houston Tx
you have learn a lesson. DO NOT UPGRADE A CAMERA ULESS IT IS ABSOLUTLY NECESSARY. A camera is NOT a PC, there is very little reason to upgrade. You should have specific bug or problem that needs fixing before you upgrade. If is not broken do not fix it.

The most likely result of upgrading a camera is to turn it into a brick.
 

fido

n3wb
Joined
Jan 24, 2021
Messages
7
Reaction score
0
Location
Poland
The problem was, the camera was unstable. It seems to me that there is some way to save the camera, for example through the J13 connector, but I might be wrong.

Ask the person you got the update from as to what the default IP might be.
No contact with this person. I received the soft a few years ago from a Chinese.
 

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
i don't recognize that logo. Are ther any other identifying marks or stickers on the cam to identify the make & model?
That would be your best bet to tracking down working firmware, But of course, you'd need access to it somehow to re-install working formware once you had it.
Most likely would need to open it up and find the serial port connection pads, if any, and connect with a UART adapter to a PC.
Probably not worth the effort. Get an new one (it'll be better anyways) , and don't do that again...
 

fido

n3wb
Joined
Jan 24, 2021
Messages
7
Reaction score
0
Location
Poland
Unfortunately, there are no other logos. This is what the PCB looks like from the inside. I have another, the same, maybe it would be possible to download the firmware. Buying a new one will definitely be there. I just want to play with this one.
1611544225870.jpg1611544225878.jpg
 

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
typically, tx connects to the first (square pad), rx the next one and grnd to the third (no need for 5v or anything else).

Fire up Putty on Windows (or equivalent serial program on IOS), most often 8N1 @115200 is proper setting, but can vary.

Any signs of life there and you MAY be able to break into the bootloader envrionment, and depending on what you find there may have commands available to reload correct firmware.

i have no idea what correct firmware woudl be or where you might get it, but that's the general approach, if you must... :)
 

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
looks about right. should be safe to swap those around if needed to get/send data, but that's the most common arrangement i've seen...
 

fido

n3wb
Joined
Jan 24, 2021
Messages
7
Reaction score
0
Location
Poland
If I have a second such camera, can I download the software from it and upload to the one that does not work.
I will work at night.
 

pozzello

Known around here
Joined
Oct 7, 2015
Messages
2,270
Reaction score
1,117
extracting firmware from the working cam in a format that can be applied to the non-working may be a challenge. it's not something I've done, but good luck!
 
Top