Need firmware for CMR-HD200-20-K20150316CCWR please

nifou

Young grasshopper
Joined
Nov 20, 2015
Messages
34
Reaction score
0
Hello,
I am near the goal, thanks in particular to the valuable whoslooking help.
Whoslooking told " First its is a hikvision but not, its uses a different type of firmware. the xamera is Hunisun abd you will need to contact them for the firmware.
i dont have it, i have the camera its fantastic and you have nothing to fain changing the firmware."


my camera model is :
CMR-HD200-20-K20150316CCWR i can find her in the lan with SADP (Cf screenshot)
View attachment 8013

How can I recover my camera ? and with what firmware ? i can't enter bye web for upgrading, i thought i need a specific tools. I now to use SADP.
So thank you to all those who can help me.

Best regards
Mike
 

nifou

Young grasshopper
Joined
Nov 20, 2015
Messages
34
Reaction score
0
Do you suggest i contact Monica from Huisun for my problem ?
Thank you for your help.
 

nifou

Young grasshopper
Joined
Nov 20, 2015
Messages
34
Reaction score
0
On the stickers camera i can read IMP-HK6127C if they can help :)
 

Centurion

n3wb
Joined
Nov 30, 2015
Messages
5
Reaction score
0
I think your camera is using the K20IA module which seems to be a hikvision module with a modified firmware.
Normally this module is detected as CMR-HD200-20-K while other cameras (using Ambarella A5S) are detected as unknown device.

According to this thread https://www.ipcamtalk.com/showthread.php/8094-Buylog-2015-20X-Optical-Zoom-IR-150M-High-Speed-Dome-Full-HD1080P-Auto-Tracking the OP tried the webinterface of a K20IA and got another camera.
Same happened to me. Tried two other brands (Imporx and Aliviz) and got always the same ... seems to me that the K20IA module isnt used anymore (at least Huisun does not according to Monica).

The stores on Aliexpress and Alibaba are advertising these cameras with wrong webinterfaces, pictures and specs. The cameras itself arent bad, but if you are in need of certain functions (slow shutter, IR cut , NAS etc) you should make sure what you want to buy in advance.


btt
Provided its detected by SADP as CMR-HD200-20-K there is a chance to use the firmware for DS-2DF7286-K20 and recover your device.

See this thread https://www.ipcamtalk.com/showthread.php/1401-DS-2DF7286-K20-firmware-update and this https://www.ipcamtalk.com/showthread.php/7075-Hi

The firmware upload is done via TFTP and is working without the webinterface. Try it first with TFTP server only and check whether your camera is sending a request. Therafter use it with firmware and cross your fingers ;)


included README said:
1. Rename the firmware to digcap.dav
2. Put the firmware under the same folder of this TFTP
3. Set the IP of computer as 192.0.0.128
4. Camera's IP can be anyone.
5. Run the tftpserv.exe
6. Power off and power on the DVR/DVS/IPC. The device will search the new firmware and upgrade it automatically.
7. Please wait until TFTP shows "Device [192.0.0.64] system update completed!" It takes about 5 minutes.
8. Close the TFTP before the camera reboots.
9. DVR/DVS/IPC will restart automatically after upgrading.

TFTP Server Tool
https://www.dropbox.com/s/x3xyh15olsz50ej/TFTP.zip?dl=0

Firmware V5.2.0 build 150106
https://www.dropbox.com/s/3z5jvsb2c6fr2d3/DZ20150105_069_R0_EN_NEU_5.2.0_150106.zip?dl=0
 

nifou

Young grasshopper
Joined
Nov 20, 2015
Messages
34
Reaction score
0
Hi centurion, and thank you for your reply, i found the solution with this firmware http://1800dvr.com/support/ivms.html DS-2ZMN2007 (it's same like my hikvision module).

But there 's a little problem, i unable to acces PTZ OSD menu with IVMS and preset 95 and Auto Tracking doesn't work in this firmware. Can i try to flash on this firmware with K20I firmware or others ?

My camera is this model : http://www.imporx.com/Productsinfo.aspx?classId=133&id=220&parentid=0#
 
Last edited by a moderator:

Centurion

n3wb
Joined
Nov 30, 2015
Messages
5
Reaction score
0
I would check the RS485 settings first. One of my cameras showed the same symtoms after changing these settings.

Configuration->System->RS485

Baud Rate9600
Data Bit8
Stop Bit1
ParityNone
Flow CtrlNone
PTZ ProtocolPELCO-D
PTZ Address0

If that doesnt help you could try the firmware posted above.
The module of my camera was advertised as DS-2ZMN2007 also. http://www.cctvdiscover.com/ptz-speed-dome-c74/cctv-speed-1080p-x20-ptz-dome-camera-hikvision-module-p189.html
The box had a sticker with model DS-2DF7286-K20 (close similarity to genuine hikvision) on it but underneath there was another label with DM-RDC305IPT-K20IA-W1 (should be a huisun).

Imho Huisun=Imporx=CCTV-Discover=Aliviz ... they are all the same. Only the brand name differs.

Normally the bootloader wont be touched during firmware upload.
I have tried it with genuine hikvision firmware and the camera didnt boot anymore nor did the selftest.
But it was still detected by SADP and responded to the tftp server. I was able to upload another firmware.

Its worth a try ... but there is no guarantee.
 
Last edited by a moderator:

nifou

Young grasshopper
Joined
Nov 20, 2015
Messages
34
Reaction score
0
HI Centurion, and thank you for your help, i'm trying your firmware is Ok :) i have just a little problem with preset 95 (OSD) i can shos just 1 line shox below :

Capture d'écran 2016-02-06 08.47.39.png
 

Centurion

n3wb
Joined
Nov 30, 2015
Messages
5
Reaction score
0
Looks like theres a general problem with the communication between module and dome. I think because its not hikvision its not detected by the module.
Or they use other ways to communicate with the dome (e.g. PTZ-Protocol). Maybe someone with a genuine hikvision speeddome can "enlight" us.
 

nifou

Young grasshopper
Joined
Nov 20, 2015
Messages
34
Reaction score
0
Many Thanks Centurion, we need maybe a new Firmware ;-)
 

cuistots

Young grasshopper
Joined
Jan 12, 2016
Messages
30
Reaction score
2
Location
french
hi, i have the same camera imporx IMP-HC7286-K20X, and i have a problem of communication ptz with nas synology.
i am unable to pilot the camera with surveillance station of synology.
i don't have the line:
PTZ Protocol Pelco D
in configuration of camera.
could you help me
i have the firmware original of camera.
 
Top