Menu
What's new

4.3.0.8 Crashes During Clip Replay

M

mcutugno

Young grasshopper
Joined
Dec 20, 2015
Messages
32
Reaction score
0
Just updated and having issues replaying clips in 4.3.0.8. This is specifically when the "test run clip through motion detection" is enabled during replay.

Anyone else with this issue?
 
M

mcutugno

Young grasshopper
Joined
Dec 20, 2015
Messages
32
Reaction score
0
To be clear, BI crashes when playing with this feature enabled.
 
M

MikeyOnline

Young grasshopper
Joined
Feb 23, 2016
Messages
72
Reaction score
18
I have an Amcrest camera too and tested it: I get the crash too! Moves one or two frames and then I get the Windows message that BI needs to close. Only with the test run checked and only on my Amcrest 1080 camera.

Mike
 
M

mcutugno

Young grasshopper
Joined
Dec 20, 2015
Messages
32
Reaction score
0
I have emailed support. I'll let you know what they come back with.
 
B

Bill Scruggs

Young grasshopper
Joined
Aug 15, 2014
Messages
32
Reaction score
18
Just discovered a temporary work around for this problem. At least it worked for me. Open the .bvr file from windows File explorer. When it plays back in Blue Iris you can uncheck the "Test run video through motion detector". I can now play videos in BI as long as I don't check the test option.

Edit: you can check and uncheck the "Test" option while playing back from File Explorer, But not from BI initiated playback. It will fail as soon as you check the test option from BI initiated playback.
 
M

MikeyOnline

Young grasshopper
Joined
Feb 23, 2016
Messages
72
Reaction score
18
Bill Scruggs said:
Just discovered a temporary work around for this problem. At least it worked for me. Open the .bvr file from windows File explorer. When it plays back in Blue Iris you can uncheck the "Test run video through motion detector". I can now play videos in BI as long as I don't check the test option.

Edit: you can check and uncheck the "Test" option while playing back from File Explorer, But not from BI initiated playback. It will fail as soon as you check the test option from BI initiated playback.
Click to expand...
That's good to know. What I did was I just brought up a clip from another camera and unchecked it from the other camera since it only crashed when viewing Amcrest clips. After I unchecked it on the Axis camera, the Amcrest clips played fine.

Mike
 
A

anijet

Pulling my weight
Joined
Mar 10, 2014
Messages
346
Reaction score
165
Location
CA
4.3.0.9 seems to have fixed it for me. Thanks to those who let Ken know.
 
You must log in or register to reply here.
Top