Search results

  1. P

    This is harder than it should be

    Maybe try Nelley's Support? even tho you purchased some time ago, they should stil be able to help...
  2. P

    Cooler thief hit neighbors house

    apparently, skateboarding IS a crime, or at least leads to it... ;-)
  3. P

    Lorex E891AB (aka IPC-HFW1841EN-PV)

    To follow up on my own question regarding when the white LED's can be triggered, it seems that other than the 'warning light' icon/button on the 'live page, they only come on with the IVS intrusion detection enabled. On these particular Lorex cams, the only 'Smart Plan' available is 'IVS' and...
  4. P

    Camera 5mp 30x chinese

    sorry,not familiar with Synology, but i imagine there must be away to set/control the PTZ protocol used for any given camera. there is no 'synology' forum here, but i know many folks do use it, so perhaps someone will chime in...
  5. P

    Camera 5mp 30x chinese

    Doryphore, so your saying the camera WORKS (for the most part) but you just need a way to invoke Preset 1 (or N) after a reboot? i'm pretty sure that if the original firmware doesn't do that, flashing new FW will not fix it. these no-name off-brands cams rarely ever provide better firmware...
  6. P

    Dahua IPC unbricking / recovery over serial UART and TFTP

    you still have not explained WHIHC small 2.5mb file you flashsed and how you did so. what was the file name and what command/process did you use to flash it? and yes, if you have a 'printenv' dump from when things were working, you'll want to re-establish as many of those settings as possible...
  7. P

    Camera 5mp 30x chinese

    on many of thes PTZ's, preset 1 is the default (or 'park') location after a reboot. not yours?
  8. P

    Dahua IPC unbricking / recovery over serial UART and TFTP

    "I have flashed camera with DH_SD-Eos_Eng_P_Stream3_V2.623.0000000.1.R.180627.bin and it worked ok, it booted up - but then i flashed with the small file i thought it was for ptz controls (that was my mistacke - it got flashed with smaller file i it wont boot and won`t show on network.." which...
  9. P

    Camera 5mp 30x chinese

    that's very odd. there should be some way to avoid that. what client app are you using to view the cams? and when i mentioned checking the network config settings, i meant on the camera, not your PC or tablet. what's the 'cloud' (Nuage) configuration set to, for example...
  10. P

    Camera 5mp 30x chinese

    check the 'network' configuration pages for UPNP any cloud-type service and make sure it's disabled. then reboot your router.
  11. P

    Help needed, Is it (possible) to load Dahua firmware on lorex lnb9272s ???

    I wonder if 'Cayenne' is their code name for newer Lorex OEM builds. ? My Lorex E891AB has HWID=IPC-HFW1841EN-PV-0280B-CAYENNE:01:02:02:72:2C:00:01:0F:01:01:00:3A5:00:00:00:00:00:01:00:02 :200 I...
  12. P

    Lorex E891AB (aka IPC-HFW1841EN-PV)

    https://www.lorextechnology.com/-/E891AB-1-p I picked up one of these 4k Lorex units cheap with a cut off ethernet/power dongle. My first few attempts to fix with a new ethernet jack resulted in no link light, tho it did power up over PoE, so I opened it up and hooked up the serial adapter...
  13. P

    single button to trigger BI shortcut / profile change (on locked pc)

    i'd look into doing it over the network somehow via the same http-based command set used by the app and UI3...
  14. P

    Help needed, Is it (possible) to load Dahua firmware on lorex lnb9272s ???

    how did you try flashing? web UI probably won't work, need to use tftp, once you're sure to have the right firmware (which must have 2831-series in it's check file, but don't go trying to add it if not there - that's a recipe for a brick)
  15. P

    I am looking for a firmware flashed

    from one of the amazon review comments: mandy.zheng@ctronics-tech.com
  16. P

    I am looking for a firmware flashed

    peut-etre demander ici? Download
  17. P

    Dahua IPC unbricking / recovery over serial UART and TFTP

    those commands are essentially 'macros' or 'shortcuts' that are often pre-defined on the devices, but apparently not yours for whatever reason. so you'll need to determine the equivalent full command line for each. for example, from a previous post: da=tftp 0x82000000...
  18. P

    I am looking for a firmware flashed

    is it one of these? if so, i have the same unit, or at least it lists as the same 'Device Type'... you might find something here (for the HX-series): Firmware | SV3C
  19. P

    Dahua IPC-HDBW81230E-ZE 12mp flashing green light? Can't see camera.

    Hubris gets us every time. Glad you figured it out!
  20. P

    Longse 8MP VF with 1/1.8" sensor SD-card recording resolution

    hee hee. yeah, Longse doesn't exactly have a great rep around here. That said, this unit seems to be sturdier and has nicer features/specs than the original 'darkfighter killer' S500 that made a splash here a few years back, only to have horrid reliability issues...
  21. P

    Dahua wifi Camera install where there's no outlets only light sockets.

    +1 for PLA, maybe even one with PoE... Amazon.com: NexusLink G.hn Powerline Adapter with Power Over Ethernet (PoE) I Single Device (GPL-1200PoE): Computers & Accessories would need to put it in some sort of weather-resistant enclosure, however. (maybe replace existing bulb fixture rather than...
  22. P

    Longse 8MP VF with 1/1.8" sensor SD-card recording resolution

    Hi all, I picked up a used Longse 8MP VF turret, model LIRAB3XSV800_8mp_3xVF just to play with as the price was too good to pass up. Its got a CS lens with 3.6-11mm (3x) zoom and 1/1.8" sensor (OmniVision's OS08A10 ) I've got it up and running (standalone) with an SD card, initially only...
  23. P

    Hornbill Security Cameras - who makes them?

    from one of the answered questions on Amazon: Mobile APP name is Guard Viewer, PC Client is "Guard Station" downloadable here: Uniview Tec Client Software | Local Recordings so Hornbill is possibly an OEM of UniView, tho not listed here: Uniview OEM Directory the turrets certainly look like...
  24. P

    Dahua IPC-HDBW81230E-ZE 12mp flashing green light? Can't see camera.

    assuming you tried a different ethernet cable? tried an external 12V power supply (vs PoE)? packet capture to check for any signs of life as it boots up? it should ARP for it's own IP address... failing that, if there's no networking going on, you may need to open it up and locate the serial...
  25. P

    Dahua IPC-HDBW81230E-ZE 12mp flashing green light? Can't see camera.

    my guess would be the 'joiner' used to connect the two cable segments doesn't make the right pin connections. you may be able to open it up and reconfigure such that each wire connects to the same color (assuming you used the standard TIA568b on all crimps...)
  26. P

    I’ve Forgotten how to install cams!

    try another ethernet cable and another switch port (one at a time), if not already try powering the cam with 12v adapter (in case the PoE is not working) try the packet capture as the cam boot up...
  27. P

    Remote location set-up

    most game cams just record locally (ie, to onboard storage). You will need some sort of connectivity into/out of the property. whether it's through a localISP( xDSL,cable,fiber) or cell service... without SOME sort of connection from outside, you'll only have local access. Of course, you...
  28. P

    I’ve Forgotten how to install cams!

    Also, it could be that one of your existing cams is already using the default address the new cams come with. Try (temporarily) disconnecting your other cams from the net and see if your new one shows up...
  29. P

    I’ve Forgotten how to install cams!

    I run a wireshark packet capture while the camera is booting on the network and check for ARP packets from the cam as it starts up and attempts to get/verify it's IP address. then, if needed, change your PC IP to match the cam's network , get into the UI and give it a valid IP on your LAN...
  30. P

    HFW-1831E - what really *is* the latest firmware (and do we care...)?

    how does i-frame pulse interfere with identifying the bad guys when somethng goes down? it doesn't. concentrate on the important stuff...
Top