Only 63.71 lbs.......
I've had 22 cams connected to my 5232-non poe- . Even at high bit rates the nvr can handle them fine as long as you use a gigabit switch.
I think aristobrat's explanation of low light specs is as good as it gets. One thing I might suggest is to just get one 2831t at first and try it...
"Note the green light that fenderman posted about in the pics below. Haven't found a way to turn that off yet..."
Narrow strip of black electrical...
Have you tried setting up the cam's ivs on the nvr? How are you viewing the nvr? directly or the web interface?
https://www.dahuasecurity.com/products/productDetail/6681 It's there, clear your browser cache maybe ?
Under record set the sub stream1 to stop.
Right click the cam's live view>PTZ>zoom+or- .
Don't think it means anything. Mines(dif. model) been on for a year and it's worked fine. If I recall it went off when I formatted the drives and...
Just tried it on mine and it does keep the the right focus on presets when set to manual.
Yes and yes. And does work with h265.
Right click>main menu>setting>system>display>ivs rule>apply.
The user manual shows a sd slot and reset button [ATTACH]
I've tried it on a couple h265 cams and it works for me as well.
That thing must have shipped with a ton of moisture in it. Or fell off the boat on the way over here...
After trial and error I came to the same camera and nvr settings as you on my 5232. When I setup a new camera all I do is set the time zone and...
https://www.dahuasecurity.com/products/productDetail/17061 Pan,tilt,no zoom or ir, Starlight.
Don't think the 49225T comes with a power supply. At least mine didn't.
Thanks for the e-mail Andy. Got the cam today with the Turkish firmware. Updated and all is well.
If the blinking led's are bothersome, put a piece of electrical tape over them. That's what I did to mine.
Yes, if mounted on a flat surface there's a nice rubber gasket on the back of the mounting arm, so you wouldn't need the junction box.
Would have made sense. You can see what I'm talking about the lid coming off here in the last picture...
If you're going to try that I'd get the older PFB200W. The top lid comes off of those so you could just drill holes for small screws and...
Don't remember for sure. Could have been the 200,203,or 204. But only one screw fit.
Sorry, you can do that from the web gui, just not the nvr gui. In IVS click on min.size next to target filter. A tiny box should appear in the...
Yes, that setting (and others) can only be done in the cams.
Separate names with a comma.