Is this the switch?
I am using one for the same reason...
Memory Leak: Quick Sync (Hardware Acceleration) | IP Cam Talk
Have you run tracert to see hops? In both scenarios.
So I just checked audio on mine and it was not working. the "Play live audio" on right click was greyed out.
Went to Camera Properties>Audio and...
First recommendation is read IP Cam Talk Cliff Notes | IP Cam Talk.
This will shed a great deal of light on your questions.
Look at post #7 in this thread and see if that helps.
@pov2 assume you are aware, as you are in Canada, there is a bit of a spat going on between Canada and China?
Huawei CFO house arrest contrasts...
I am running laest BI version 184.108.40.206 and my Logitech Alert works flawlessly, so not a BI issue.
I do need to sell it and put a better cam up!
And all these years I had no idea!
"...But Violet Goes Willingly"
That is great!
And of course you are welcome.
Other than what @bp2008 said, no since the Netgear won't be on the same lan. You are basically substituting the ASUS for the Netgear.
but .0 and...
OK. Therein lies the rub.
Config the ASUS to be on the 254 or change all your statics for .1
Then it should work.
That is the subnet mask. You really need to get a basic understanding to undertake this.
I think your default on the netgear makes your subnet...
So you may need to do some reading to get a basic understanding of what is going on here and networking.
The Netgear will be in bridge mode and...
No. The Netgear will do that.
Not sure what that means. When you bridge the netgear, the ASUS will become your router. So it will be your dhcp server. If it is configured for a...
You need to put the Netgear in bridge mode so as @SouthernYankee stated, it is just a modem.
Forget about all those protocols as you will be...
So best idea is to ignore and look at the light spilling over as a benefit. BUT I had another thought:
How about a PTZ with a bright ir on...
As previously stated, do a factory reset on that cam.
IIRC there is a little pinhole you stick a paper clip in for 30 seconds or so.
Sorry but often on this forum someone will stumble in to a thread and know the answer.
You would really be better off selling it and getting a...
Well assuming you are running the commander software on the same PC and it works, probably not.
I'd factory reset the cam and go back to the...
Is Hardware accelerated decoder set to "no" on video tab?
well one other "shot in the dark", are you using the logitech commander program at the same time?
I have found these cameras have trouble...
Can you ping the cam?
Have you tried the find/inspect in BI?
OK. Same as mine. I'm guessing you have a user/password issue. I see in the IP Scan there were two WiLife cams so assume you have tried them both?
What model Alert?
So I wonder if the A/V center outlet has the ground issue?
I have a similar situation but with a 50 foot hdmi cable, two different AC outlets. No...
Seems weird there is a ground potential difference in what seems to be a short distance. Maybe one outlet is not properly grounded.
In some older...
No sorry Wilife is what they showed up in your IP scan.
Alert for BI
Separate names with a comma.